Bosch CMG633B.1, Инструкция по эксплуатации

Страница: 15 / 56

Time-setting options
en
15
Changing
After starting the appliance, the temperature is
highlighted. When you move the rotary selector, the
temperature is changed and applied immediately.
To change the type of heating, first press the
l
Start/
Stop button to interrupt the operation and then touch
the
!
field. The first type of heating appears with the
corresponding default temperature. Use the rotary
selector to change the type of heating.
Note:
When you change the type of heating, the other
settings are also reset.
Rapid heating
With Rapid heating, you can shorten the heat-up time.
Heating type suitable for Rapid heating is:
■
<
4D hot air
To ensure an even cooking result, do not place your
food in the cooking compartment until Rapid heating is
complete.
Adjusting settings
Ensure you have selected a suitable heating type and
set a temperature of at least 100 °C. Otherwise, Rapid
heating cannot be activated.
1.
Set the heating type and temperature.
2.
Touch the
F
field.
The symbol lights up red. A confirmation note appears
on the display.
When Rapid heating comes to an end, an audible
signal sounds and a note appears on the display. The
symbol is no longer lit up. Place your dish in the
cooking compartment.
Note:
The "cooking time" time-setting option starts at
the same time as Rapid heating. Therefore, only set a
cooking time when Rapid heating has come to an end.
Cancelling
To cancel Rapid heating, touch the
F
field again. The
symbol is no longer lit up.
O
Time-setting options
Time-sett ing optio ns
Your appliance has different time-setting options.
You can call up the cooking time and the end time after
setting a operation using the
s
field. The timer has a
separate
t
field and can be adjusted at any time.
A signal sounds after a cooking time or timed period
has elapsed. You can cancel the signal early by
touching the
s
field.
Note:
You can change how long the signal sounds for
in the basic settings.
~
"Basic settings" on page 20
Setting the cooking time
You can set the cooking time for your dish on the
appliance. This means that the cooking time is not
unintentionally exceeded and you do not need to
interrupt other work in order to end the operation.
Setting
Depending on which direction you turn the rotary
selector first, the cooking time starts at a particular
default value: Left = 10 minutes, right = 30 minutes.
The cooking time can be set in one-minute increments
up to one hour, and then in five-minute increments.
The maximum time that can be set is 23 hours and 59
minutes.
Example in the picture: Cooking time of 45 minutes.
1.
Set the operating mode and temperature or level.
2.
Touch the
s
field before starting.
The cooking time is highlighted in white in the
display.
3.
Turn the rotary selector to set the cooking time.
Time-setting option Use
q
Cooking time After the set cooking time has elapsed, the
appliance ends the operation automatically.
r
End Enter a cooking time and the required end
time. The appliance starts automatically so
that the operation ends at the required time.
t
Timer The timer functions like an egg timer. It runs
independently from the operation and the
other time-setting options. After the set time
has elapsed, the appliance does not switch on
or off automatically.
_
7H[W
7H[W
7\SHVRIKHDWLQJ
P V
¿
(QG
¿
&RRNLQJWLPH