22
en | Programming
Carephone 61
F.01U.239.30x | V1 | 2011.06
User Manual
Bosch Security Systems
50 to 58 Alarm type links
It is possible to link an alarm type to specific call numbers. Each
programming step refers to a certain alarm type.
–
50
: wireless transmitter (emergency call with a wireless transmitter)
–
51
: emergency call (with the Carephone 61)
–
53
: repeated emergency call and local confirmation
–
55
: service call / direct call. The direct call is only made to a telephone
without acknowledgement. One single attempt will be made.
–
56
: technical messages 1 (power failure, power restored, unit battery
failure, unit battery low, line failure, line restored)
–
57
: technical messages 2 (automatic test call, radio jamming, radio
transmission monitoring, transmitter battery low)
Choose which destination numbers
1
to
10
are associated with each alarm
type. If no destination number is entered, then all programmed call
numbers will be called.
–
58
: registration call
Registration call: after an emergency call, the destination number
entered in setting 58 will be called for registration purposes. The call
destination must be a monitoring centre.
Choose which call numbers
1
to
10
are associated with this alarm type. If
no destination number is entered, then no call is made.
60 Number of announcements when calling a telephone
Specify how often the Carephone will announce the recorded message.
–
0
= no announcement, from
1
to
9
for the required number of
announcements.
