Bosch BULLS Twenty 6 EVO Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 116

Bosch BULLS Twenty 6 EVO Скачать руководство пользователя страница 6

MY20B01 - 52_1.0_02.10.2019

6

About these operating instructions

1

About these operating instructions

Thank you for your trust!

BULLS

pedelecs

are premium quality bicycles.

You have made an excellent choice. Your
specialist dealer will provide you with guidance
and instruction and assemble your product. Your
specialist dealer will also be happy to assist you in
the future whether you require maintenance,
conversion or repair.

You are receiving these operating instructions
with your new pedelec. Please take time to
become familiar with your new pedelec and follow
the tips and suggestions in the operating
instructions. They will help you to enjoy your
pedelec for a long time to come. We hope you
have fun and wish you well on all of your rides!

These operating instructions are mainly designed
for the rider or the operator. They aim to ensure
that non-professionals can use the pedelec safely.

Download the operating
instructions onto your phone
at the following link, so that
you can use them when you
are out riding:

www.bulls.de/service/
downloads

.

1.1

Manufacturer

The pedelec manufacturer is:

ZEG Zweirad-Einkaufs-Genossenschaft eG
Longericher Straße 2
50739 Köln, Germany

Tel.:

+49 221 17959 0

Fax:

+49 221 17959 31

Email:

[email protected]

Website:

1.2

Type number and model

These operating instructions are an integral part
of pedelecs with the following type numbers:

*The type number was not available when we
went to press.

1.3

Identifying the operating
instructions

You will find the

operating instructions

identification number at the bottom left-hand side
of each page. The identification number consists
of the document number, the version number and
the release date.

1.4

Subject to change

The information contained in these

operating

instructions

are the approved technical

specifications at the time of printing. Any
significant changes will be included in a new issue
of the

operating instructions

.

You will find any modifications to these

operating

instructions

www.bulls.de/service/downloads

.

Notice

These

operating instructions

are not a substitute

for personal instruction by the supplying specialist
dealer.

These operating instructions are an integral part
of the pedelec. Therefore, if it is re-sold at a later
time, they must be handed over to the subsequent
owner.

Sections are also designed especially for the
specialist dealer. These sections aim to ensure
that specialist dealers complete initial assembly
and maintenance safely and reliably. The
sections for specialist dealers are highlighted in
grey and marked with a spanner symbol.

Type no.

Model

Pedelec type

20-26-4001

Twenty 6 Evo 26"

Bicycle for young

adults

20-26-3001

Twenty 6 Evo Team 26

Bicycle for young

adults

Table 1: Type number, model and pedelec type

Identification number

MY20B01 - 52_1.0_02.10.2019

«
...
4
5
6
7
8
...
»

Содержание BULLS Twenty 6 EVO





















































































































Отзывы:

Нет отзывов