10
When you stop cleaning for a moment, you can use
the parking aid at the back of the vacuum cleaner.
Slide the plastic tab on the nozzle connector into the
groove at the back of the vacuum cleaner.
Switch the vacuum cleaner to “Stand by” mode first
Vacuuming with accessories
Pull the 4in1 accessory in the direction of the arrow to
remove it from the accessory holder.
a)
Crevice nozzle
For vacuuming in crevices and corners. For difficult
to get to places, the 4in1 accessory can be
extended in two stages to 14 inches (or 360 mm)
by pulling out the crevice nozzle.
Extend the crevice nozzle to the second stop until
you can hear it engage.
To push the crevice nozzle together again, release
the telescope lock (by pressing in arrow direction).
b)
Upholstery nozzle
For cleaning upholstery, curtains, etc.
c)
Furniture brush
For window frames, cabinets, lamp shades etc.
Fold the upholstery nozzle over in the direction of
the arrow.
To extend the brush ring, turn in the direction of
the arrow.
Before replacing the 4in1 accessory in the
accessory holder, retract the bush ring and fold
the upholstery nozzle back.
!
Caution: to prevent damage to the nozzle / furniture
brush, fold the upholstery nozzle out only when the
furniture brush is retracted.
CLICK!
CLICK!
a
b
c
5100 401 792 A 16.04.2007 11:18 Uhr Seite 10
