13
Place a new MEGAfilt
®
SuperTEX dust bag in the
holder and close the dust bag compartment cover.
!
Caution: The dust bag compartment cover will
only close when the MEGAfilt
®
SuperTEX dust
bag, textile filter or dust collector has been
inserted.
If the dust bag change indicator continues to
light up after the dust bag has been changed,
please check whether the nozzle, pipe or
vacuum hose are obstructed.
Changing the dust bag
Replacing the MEGAfilt
®
SuperTEX dust bag
If the dust bag change indicator lights up brightly
and uniformly when the nozzle is lifted from the floor
and the vacuum is on its highest setting, you
should change the dust bag, even if it is not yet full.
In this case it is essential to change the dust bag
due to the type of material it contains.
Turn the dust compartment locking lever in the
direction of the arrow to open the dust compartment
cover.
Seal the MEGAfilt
®
Super TEX dust bag by pulling the
sealing strip and pull up to remove the bag.
5100 401 792 A 16.04.2007 11:18 Uhr Seite 13