Bosch BHN09070 MOVE, Инструкция по эксплуатации

Страница: 37 / 88

35
en
26
Fold out the picture pages!
Before using for the first time
Fig.
Carefully place the handle onto the main housing and
screw it into place.
Fig.
Plug the hand-held vacuum cleaner into the floor tool
and lock it into place.
To release the floor tool, press the release button
and pull the hand-held vacuum cleaner out of the
tool.
Charging
!
Caution: Before using the vacuum cleaner for the
first time, the batteries must be charged for at
least 16 hours.
The appliance must only be charged and operated
with a battery pack that has the same voltage as
the appliance itself.
Please refer to the voltage specified on the battery
pack and on the appliance.
Fig.
To charge the vacuum cleaner, place it close to a
socket. The appliance can be left standing
anywhere in the room. (see Fig. 6)
Plug the charging cable into the connection at the
rear of the appliance.
Plug the charging cable plug into the socket.
The charging indicator lights up red during the
charging process.
If the appliance is ready for use, the charging
indicator lights up blue. It takes 12 to 16 hours to
charge the appliance fully.
It is normal for the charging cable and hand-held
vacuum cleaner to become hot and this is not a
cause for concern.
Using the hand-held vacuum cleaner
Vacuuming
Fig.
Actuate the sliding switch in the direction of the
arrow.
1
2
3
4
Controlling the suction level
Fig.
Slide the sliding switch into the required position in
order to set the suction power:
Position 1 = medium power setting for simple
cleaning tasks
=> The appliance has a longer run time.
Position 2 = high power setting for difficult cleaning
tasks
=> The appliance has more power for a shorter run
time.
Fig.
During short pauses in vacuuming, the appliance can
be left standing anywhere in the room. To do this,
tilt the vacuum cleaner forwards slightly in the
direction of the nozzle.
!
Caution: When the appliance is left standing, it
must be switched off because, if the brush is
turning while the appliance is standing still, it could
cause damage to the floor covering.
Using the hand-held cordless vacuum
cleaner
Fig.
Unlock the hand-held cordless vacuum cleaner by
pressing the release button and remove it from the
hand-held vacuum cleaner.
Crevice nozzle
For vacuuming crevices and corners, etc.
Fig.
Insert the crevice nozzle into the air intake opening
of the hand-held cordless vacuum cleaner, as
illustrated.
Charging the hand-held cordless
vacuum cleaner
Fig.
To charge the hand-held cordless vacuum cleaner,
insert it into the hand-held vacuum cleaner and lock
into place. Make sure that it is seated correctly.
After using the appliance
Fig.
Switch off the appliance after vacuuming.
6
7
8
9
5
10
en
BBH2...readyy'y (Innenteil)_BBH2...readyy'y 29.11.14 16:28 Seite 26
26
Fold out the picture pages!
Before using for the first time
Fig.
Carefully place the handle onto the main housing and
screw it into place.
Fig.
Plug the hand-held vacuum cleaner into the floor tool
and lock it into place.
To release the floor tool, press the release button
and pull the hand-held vacuum cleaner out of the
tool.
Charging
!
Caution: Before using the vacuum cleaner for the
first time, the batteries must be charged for at
least 16 hours.
The appliance must only be charged and operated
with a battery pack that has the same voltage as
the appliance itself.
Please refer to the voltage specified on the battery
pack and on the appliance.
Fig.
To charge the vacuum cleaner, place it close to a
socket. The appliance can be left standing
anywhere in the room. (see Fig. 6)
Plug the charging cable into the connection at the
rear of the appliance.
Plug the charging cable plug into the socket.
The charging indicator lights up red during the
charging process.
If the appliance is ready for use, the charging
indicator lights up blue. It takes 12 to 16 hours to
charge the appliance fully.
It is normal for the charging cable and hand-held
vacuum cleaner to become hot and this is not a
cause for concern.
Using the hand-held vacuum cleaner
Vacuuming
Fig.
Actuate the sliding switch in the direction of the
arrow.
1
2
3
4
Controlling the suction level
Fig.
Slide the sliding switch into the required position in
order to set the suction power:
Position 1 = medium power setting for simple
cleaning tasks
=> The appliance has a longer run time.
Position 2 = high power setting for difficult cleaning
tasks
=> The appliance has more power for a shorter run
time.
Fig.
During short pauses in vacuuming, the appliance can
be left standing anywhere in the room. To do this,
tilt the vacuum cleaner forwards slightly in the
direction of the nozzle.
!
Caution: When the appliance is left standing, it
must be switched off because, if the brush is
turning while the appliance is standing still, it could
cause damage to the floor covering.
Using the hand-held cordless vacuum
cleaner
Fig.
Unlock the hand-held cordless vacuum cleaner by
pressing the release button and remove it from the
hand-held vacuum cleaner.
Crevice nozzle
For vacuuming crevices and corners, etc.
Fig.
Insert the crevice nozzle into the air intake opening
of the hand-held cordless vacuum cleaner, as
illustrated.
Charging the hand-held cordless
vacuum cleaner
Fig.
To charge the hand-held cordless vacuum cleaner,
insert it into the hand-held vacuum cleaner and lock
into place. Make sure that it is seated correctly.
After using the appliance
Fig.
Switch off the appliance after vacuuming.
6
7
8
9
5
10
en
BBH2...readyy'y (Innenteil)_BBH2...readyy'y 29.11.14 16:28 Seite 26
26
Fold out the picture pages!
Before using for the first time
Fig.
Carefully place the handle onto the main housing and
screw it into place.
Fig.
Plug the hand-held vacuum cleaner into the floor tool
and lock it into place.
To release the floor tool, press the release button
and pull the hand-held vacuum cleaner out of the
tool.
Charging
!
Caution: Before using the vacuum cleaner for the
first time, the batteries must be charged for at
least 16 hours.
The appliance must only be charged and operated
with a battery pack that has the same voltage as
the appliance itself.
Please refer to the voltage specified on the battery
pack and on the appliance.
Fig.
To charge the vacuum cleaner, place it close to a
socket. The appliance can be left standing
anywhere in the room. (see Fig. 6)
Plug the charging cable into the connection at the
rear of the appliance.
Plug the charging cable plug into the socket.
The charging indicator lights up red during the
charging process.
If the appliance is ready for use, the charging
indicator lights up blue. It takes 12 to 16 hours to
charge the appliance fully.
It is normal for the charging cable and hand-held
vacuum cleaner to become hot and this is not a
cause for concern.
Using the hand-held vacuum cleaner
Vacuuming
Fig.
Actuate the sliding switch in the direction of the
arrow.
1
2
3
4
Controlling the suction level
Fig.
Slide the sliding switch into the required position in
order to set the suction power:
Position 1 = medium power setting for simple
cleaning tasks
=> The appliance has a longer run time.
Position 2 = high power setting for difficult cleaning
tasks
=> The appliance has more power for a shorter run
time.
Fig.
During short pauses in vacuuming, the appliance can
be left standing anywhere in the room. To do this,
tilt the vacuum cleaner forwards slightly in the
direction of the nozzle.
!
Caution: When the appliance is left standing, it
must be switched off because, if the brush is
turning while the appliance is standing still, it could
cause damage to the floor covering.
Using the hand-held cordless vacuum
cleaner
Fig.
Unlock the hand-held cordless vacuum cleaner by
pressing the release button and remove it from the
hand-held vacuum cleaner.
Crevice nozzle
For vacuuming crevices and corners, etc.
Fig.
Insert the crevice nozzle into the air intake opening
of the hand-held cordless vacuum cleaner, as
illustrated.
Charging the hand-held cordless
vacuum cleaner
Fig.
To charge the hand-held cordless vacuum cleaner,
insert it into the hand-held vacuum cleaner and lock
into place. Make sure that it is seated correctly.
After using the appliance
Fig.
Switch off the appliance after vacuuming.
6
7
8
9
5
10
en
BBH2...readyy'y (Innenteil)_BBH2...readyy'y 29.11.14 16:28 Seite 26
26
Fold out the picture pages!
Before using for the first time
Fig.
Carefully place the handle onto the main housing and
screw it into place.
Fig.
Plug the hand-held vacuum cleaner into the floor tool
and lock it into place.
To release the floor tool, press the release button
and pull the hand-held vacuum cleaner out of the
tool.
Charging
!
Caution: Before using the vacuum cleaner for the
first time, the batteries must be charged for at
least 16 hours.
The appliance must only be charged and operated
with a battery pack that has the same voltage as
the appliance itself.
Please refer to the voltage specified on the battery
pack and on the appliance.
Fig.
To charge the vacuum cleaner, place it close to a
socket. The appliance can be left standing
anywhere in the room. (see Fig. 6)
Plug the charging cable into the connection at the
rear of the appliance.
Plug the charging cable plug into the socket.
The charging indicator lights up red during the
charging process.
If the appliance is ready for use, the charging
indicator lights up blue. It takes 12 to 16 hours to
charge the appliance fully.
It is normal for the charging cable and hand-held
vacuum cleaner to become hot and this is not a
cause for concern.
Using the hand-held vacuum cleaner
Vacuuming
Fig.
Actuate the sliding switch in the direction of the
arrow.
1
2
3
4
Controlling the suction level
Fig.
Slide the sliding switch into the required position in
order to set the suction power:
Position 1 = medium power setting for simple
cleaning tasks
=> The appliance has a longer run time.
Position 2 = high power setting for difficult cleaning
tasks
=> The appliance has more power for a shorter run
time.
Fig.
During short pauses in vacuuming, the appliance can
be left standing anywhere in the room. To do this,
tilt the vacuum cleaner forwards slightly in the
direction of the nozzle.
!
Caution: When the appliance is left standing, it
must be switched off because, if the brush is
turning while the appliance is standing still, it could
cause damage to the floor covering.
Using the hand-held cordless vacuum
cleaner
Fig.
Unlock the hand-held cordless vacuum cleaner by
pressing the release button and remove it from the
hand-held vacuum cleaner.
Crevice nozzle
For vacuuming crevices and corners, etc.
Fig.
Insert the crevice nozzle into the air intake opening
of the hand-held cordless vacuum cleaner, as
illustrated.
Charging the hand-held cordless
vacuum cleaner
Fig.
To charge the hand-held cordless vacuum cleaner,
insert it into the hand-held vacuum cleaner and lock
into place. Make sure that it is seated correctly.
After using the appliance
Fig.
Switch off the appliance after vacuuming.
6
7
8
9
5
10
en
BBH2...readyy'y (Innenteil)_BBH2...readyy'y 29.11.14 16:28 Seite 26
7
Figure
Insert the cordless vacuum cleaner into the charger
as shown.
!
Make sure that the contacts of the cordless vacuum
cleaner and charger plug are not dirty. Clean the
contacts if necessary.
!
Before using the appliance for the first time, the
cordless vacuum cleaner batteries must be charged
for at least 16 hours.
Figure
Plug the charger plug into the socket.
The charging indicator lights up.
The indicator remains lit for as long as the vacuum
cleaner is connected to the mains via the charger.
It does not go out even when the vacuum cleaner
batteries are fully charged.
It is normal for the charger and vacuum cleaner to
become hot and not a cause for concern.
You can charge the cordless vacuum cleaner at any
time when it is not in use. In this way, it is always
ready for use.
Vacuuming
Figure
Remove the appliance from the charger and move the
on/off button in the direction of the arrow.
Crevice nozzle
Figure
For vacuuming crevices and corners, etc.
Insert the crevice nozzle into the air intake opening
of the cordless vacuum cleaner, as illustrated.
Hard furnishings brush
Figure
For vacuuming picture frames, books, furniture
requiring particular care, etc.
Fit the hard furnishings brush as shown onto the
crevice nozzle.
Figure
After vacuuming, return the appliance to the charger.
8
7
6
5
4
3
Cleaning the filters
As far as possible, the cordless vacuum cleaner should
be emptied every time after vacuuming.
Figure
Using the release button, unlock the dust container
and withdraw it from the suction unit.
Figure
Using the handle, remove the dirt filter and cloth
filter from the dust container and clean them by
tapping or brushing out the dirt with the cleaning
brush provided.
Figure
Empty the dust container.
If heavily soiled, the filters and dust container can be
washed out.
Then wipe out the dust container with a dry cloth.
Allow the filters to dry completely before refitting.
Figure
a)
Insert the dirt filter and cloth filter into the dust
container.
b)
Fit the dust container onto the suction unit and lock
into place.
Filters can be obtained from our after-sales service as
required
Care
Before cleaning the cordless vacuum cleaner, it must
be switched off and disconnected from the charger.
It can be cleaned with a standard commercially-
available plastic cleaner.
!
Do not use a scourer, glass-cleaning agent or
all-purpose cleaning product. Never immerse
the vacuum cleaner in water
Battery disposal
Before disposing of the appliance, please remove the
battery cartridge and dispose of it separately.
Figure
Slide open the battery compartment in the direction
of the arrow.
Cut through the retaining tape and remove the
battery cartridge from the appliance.
Cut through the power cables and, to ensure safety,
bind and insulate each of the cable ends with tape.
13
12
11
10
9
BKS4 dry (12/11) (Innenteil) 21.12.2011 15:20 Uhr Seite 7
26
Fold out the picture pages!
Before using for the first time
Fig.
Carefully place the handle onto the main housing and
screw it into place.
Fig.
Plug the hand-held vacuum cleaner into the floor tool
and lock it into place.
To release the floor tool, press the release button
and pull the hand-held vacuum cleaner out of the
tool.
Charging
!
Caution: Before using the vacuum cleaner for the
first time, the batteries must be charged for at
least 16 hours.
The appliance must only be charged and operated
with a battery pack that has the same voltage as
the appliance itself.
Please refer to the voltage specified on the battery
pack and on the appliance.
Fig.
To charge the vacuum cleaner, place it close to a
socket. The appliance can be left standing
anywhere in the room. (see Fig. 6)
Plug the charging cable into the connection at the
rear of the appliance.
Plug the charging cable plug into the socket.
The charging indicator lights up red during the
charging process.
If the appliance is ready for use, the charging
indicator lights up blue. It takes 12 to 16 hours to
charge the appliance fully.
It is normal for the charging cable and hand-held
vacuum cleaner to become hot and this is not a
cause for concern.
Using the hand-held vacuum cleaner
Vacuuming
Fig.
Actuate the sliding switch in the direction of the
arrow.
1
2
3
4
Controlling the suction level
Fig.
Slide the sliding switch into the required position in
order to set the suction power:
Position 1 = medium power setting for simple
cleaning tasks
=> The appliance has a longer run time.
Position 2 = high power setting for difficult cleaning
tasks
=> The appliance has more power for a shorter run
time.
Fig.
During short pauses in vacuuming, the appliance can
be left standing anywhere in the room. To do this,
tilt the vacuum cleaner forwards slightly in the
direction of the nozzle.
!
Caution: When the appliance is left standing, it
must be switched off because, if the brush is
turning while the appliance is standing still, it could
cause damage to the floor covering.
Using the hand-held cordless vacuum
cleaner
Fig.
Unlock the hand-held cordless vacuum cleaner by
pressing the release button and remove it from the
hand-held vacuum cleaner.
Crevice nozzle
For vacuuming crevices and corners, etc.
Fig.
Insert the crevice nozzle into the air intake opening
of the hand-held cordless vacuum cleaner, as
illustrated.
Charging the hand-held cordless
vacuum cleaner
Fig.
To charge the hand-held cordless vacuum cleaner,
insert it into the hand-held vacuum cleaner and lock
into place. Make sure that it is seated correctly.
After using the appliance
Fig.
Switch off the appliance after vacuuming.
6
7
8
9
5
10
en
BBH2...readyy'y (Innenteil)_BBH2...readyy'y 29.11.14 16:28 Seite 26
26
Fold out the picture pages!
Before using for the first time
Fig.
Carefully place the handle onto the main housing and
screw it into place.
Fig.
Plug the hand-held vacuum cleaner into the floor tool
and lock it into place.
To release the floor tool, press the release button
and pull the hand-held vacuum cleaner out of the
tool.
Charging
!
Caution: Before using the vacuum cleaner for the
first time, the batteries must be charged for at
least 16 hours.
The appliance must only be charged and operated
with a battery pack that has the same voltage as
the appliance itself.
Please refer to the voltage specified on the battery
pack and on the appliance.
Fig.
To charge the vacuum cleaner, place it close to a
socket. The appliance can be left standing
anywhere in the room. (see Fig. 6)
Plug the charging cable into the connection at the
rear of the appliance.
Plug the charging cable plug into the socket.
The charging indicator lights up red during the
charging process.
If the appliance is ready for use, the charging
indicator lights up blue. It takes 12 to 16 hours to
charge the appliance fully.
It is normal for the charging cable and hand-held
vacuum cleaner to become hot and this is not a
cause for concern.
Using the hand-held vacuum cleaner
Vacuuming
Fig.
Actuate the sliding switch in the direction of the
arrow.
1
2
3
4
Controlling the suction level
Fig.
Slide the sliding switch into the required position in
order to set the suction power:
Position 1 = medium power setting for simple
cleaning tasks
=> The appliance has a longer run time.
Position 2 = high power setting for difficult cleaning
tasks
=> The appliance has more power for a shorter run
time.
Fig.
During short pauses in vacuuming, the appliance can
be left standing anywhere in the room. To do this,
tilt the vacuum cleaner forwards slightly in the
direction of the nozzle.
!
Caution: When the appliance is left standing, it
must be switched off because, if the brush is
turning while the appliance is standing still, it could
cause damage to the floor covering.
Using the hand-held cordless vacuum
cleaner
Fig.
Unlock the hand-held cordless vacuum cleaner by
pressing the release button and remove it from the
hand-held vacuum cleaner.
Crevice nozzle
For vacuuming crevices and corners, etc.
Fig.
Insert the crevice nozzle into the air intake opening
of the hand-held cordless vacuum cleaner, as
illustrated.
Charging the hand-held cordless
vacuum cleaner
Fig.
To charge the hand-held cordless vacuum cleaner,
insert it into the hand-held vacuum cleaner and lock
into place. Make sure that it is seated correctly.
After using the appliance
Fig.
Switch off the appliance after vacuuming.
6
7
8
9
5
10
en
BBH2...readyy'y (Innenteil)_BBH2...readyy'y 29.11.14 16:28 Seite 26
26
Fold out the picture pages!
Before using for the first time
Fig.
Carefully place the handle onto the main housing and
screw it into place.
Fig.
Plug the hand-held vacuum cleaner into the floor tool
and lock it into place.
To release the floor tool, press the release button
and pull the hand-held vacuum cleaner out of the
tool.
Charging
!
Caution: Before using the vacuum cleaner for the
first time, the batteries must be charged for at
least 16 hours.
The appliance must only be charged and operated
with a battery pack that has the same voltage as
the appliance itself.
Please refer to the voltage specified on the battery
pack and on the appliance.
Fig.
To charge the vacuum cleaner, place it close to a
socket. The appliance can be left standing
anywhere in the room. (see Fig. 6)
Plug the charging cable into the connection at the
rear of the appliance.
Plug the charging cable plug into the socket.
The charging indicator lights up red during the
charging process.
If the appliance is ready for use, the charging
indicator lights up blue. It takes 12 to 16 hours to
charge the appliance fully.
It is normal for the charging cable and hand-held
vacuum cleaner to become hot and this is not a
cause for concern.
Using the hand-held vacuum cleaner
Vacuuming
Fig.
Actuate the sliding switch in the direction of the
arrow.
1
2
3
4
Controlling the suction level
Fig.
Slide the sliding switch into the required position in
order to set the suction power:
Position 1 = medium power setting for simple
cleaning tasks
=> The appliance has a longer run time.
Position 2 = high power setting for difficult cleaning
tasks
=> The appliance has more power for a shorter run
time.
Fig.
During short pauses in vacuuming, the appliance can
be left standing anywhere in the room. To do this,
tilt the vacuum cleaner forwards slightly in the
direction of the nozzle.
!
Caution: When the appliance is left standing, it
must be switched off because, if the brush is
turning while the appliance is standing still, it could
cause damage to the floor covering.
Using the hand-held cordless vacuum
cleaner
Fig.
Unlock the hand-held cordless vacuum cleaner by
pressing the release button and remove it from the
hand-held vacuum cleaner.
Crevice nozzle
For vacuuming crevices and corners, etc.
Fig.
Insert the crevice nozzle into the air intake opening
of the hand-held cordless vacuum cleaner, as
illustrated.
Charging the hand-held cordless
vacuum cleaner
Fig.
To charge the hand-held cordless vacuum cleaner,
insert it into the hand-held vacuum cleaner and lock
into place. Make sure that it is seated correctly.
After using the appliance
Fig.
Switch off the appliance after vacuuming.
6
7
8
9
5
10
en
BBH2...readyy'y (Innenteil)_BBH2...readyy'y 29.11.14 16:28 Seite 26
27
Emptying the dust container
In order to achieve the best possible vacuuming
results, the dust container should be emptied after
every use.
Fig.
Remove the hand-held cordless vacuum cleaner from
the hand-held vacuum cleaner (see fig. 7)
Using the release button, unlock the dust container
and remove it from the motor unit.
Fig.
Use the handle to remove the motor protection filter
and foam filter from the dust container.
Empty the dust container.
Cleaning the filter
Fig.
Unlock the dust container. Remove the motor
protection filter and foam filter from the dust
container (see fig. 11 and 12)
Clean the motor protection filter and foam filter by
tapping out the dirt.
If there are heavy deposits of dirt, the filter and dust
container can be washed out.
Then wipe out the dust container with a dry cloth;
allow the filter to dry completely before re-inserting
it.
Fig.
a)
Insert the motor protection filter and foam filter into
the dust container.
a) Fit the dust container onto the motor unit and lock it
into place.
New filters can be obtained from our after-sales
service, if required.
Cleaning the floor tool
Before carrying out any maintenance, switch off the
vacuum cleaner and disconnect it from the charging
cable.
Fig.
Release the brush roller using the release button and
pull it sideways out of the floor tool.
Using the groove provided, cut through threads and
hairs wound round the rollers with scissors and then
remove them.
Push the brush roller in sideways along the guide rod
in the floor tool and lock in place using the release
button.
!
Caution: The floor tool must only be put into
operation with the brush roller fitted.
13
14
11
12
15
Caution!
Floor tools are subject to a certain amount of wear,
depending on the type of hard floors you have
(e.g. rough, rustic tiles). Therefore, you must check
the underside of the floor tool at regular intervals.
Worn undersides of floor tools may have sharp edges
that can damage sensitive hard floors, such as parquet
or linoleum. The manufacturer does not accept any
responsibility for damage caused by worn floor tools.
Replacing the battery pack
The battery pack can be easily removed
from the appliance and replaced.
Fig.
Release the battery pack in the direction of the
arrow and remove it from the appliance.
Insert the new battery pack and lock it in place.
A new or additional battery pack can be obtained from
our after-sales service by stating the appliance type.
!
Caution: The appliance must only be charged and
operated with a battery pack that has the same
voltage as the appliance itself.
Please refer to the voltage specified on the battery
pack and on the appliance.
Care
Before cleaning the cordless vacuum cleaner or hand-
held vacuum cleaner, they must be switched off and
disconnected from the charging cable. They can be
cleaned using a standard commercially-available plastic
cleaner.
!
Do not use a scourer, glass-cleaning agent or multi-
purpose cleaning products. Never immerse the
vacuum cleaner in water.
Disposing of the battery pack
Before disposing of the appliance, remove the battery
pack and dispose of it in an environmentally friendly
way. (see fig. 16)
16
en
BBH2...readyy'y (Innenteil)_BBH2...readyy'y 29.11.14 16:28 Seite 27
7
Figure
Insert the cordless vacuum cleaner into the charger
as shown.
!
Make sure that the contacts of the cordless vacuum
cleaner and charger plug are not dirty. Clean the
contacts if necessary.
!
Before using the appliance for the first time, the
cordless vacuum cleaner batteries must be charged
for at least 16 hours.
Figure
Plug the charger plug into the socket.
The charging indicator lights up.
The indicator remains lit for as long as the vacuum
cleaner is connected to the mains via the charger.
It does not go out even when the vacuum cleaner
batteries are fully charged.
It is normal for the charger and vacuum cleaner to
become hot and not a cause for concern.
You can charge the cordless vacuum cleaner at any
time when it is not in use. In this way, it is always
ready for use.
Vacuuming
Figure
Remove the appliance from the charger and move the
on/off button in the direction of the arrow.
Crevice nozzle
Figure
For vacuuming crevices and corners, etc.
Insert the crevice nozzle into the air intake opening
of the cordless vacuum cleaner, as illustrated.
Hard furnishings brush
Figure
For vacuuming picture frames, books, furniture
requiring particular care, etc.
Fit the hard furnishings brush as shown onto the
crevice nozzle.
Figure
After vacuuming, return the appliance to the charger.
8
7
6
5
4
3
Cleaning the filters
As far as possible, the cordless vacuum cleaner should
be emptied every time after vacuuming.
Figure
Using the release button, unlock the dust container
and withdraw it from the suction unit.
Figure
Using the handle, remove the dirt filter and cloth
filter from the dust container and clean them by
tapping or brushing out the dirt with the cleaning
brush provided.
Figure
Empty the dust container.
If heavily soiled, the filters and dust container can be
washed out.
Then wipe out the dust container with a dry cloth.
Allow the filters to dry completely before refitting.
Figure
a)
Insert the dirt filter and cloth filter into the dust
container.
b) Fit the dust container onto the suction unit and lock
into place.
Filters can be obtained from our after-sales service as
required
Care
Before cleaning the cordless vacuum cleaner, it must
be switched off and disconnected from the charger.
It can be cleaned with a standard commercially-
available plastic cleaner.
!
Do not use a scourer, glass-cleaning agent or
all-purpose cleaning product. Never immerse
the vacuum cleaner in water
Battery disposal
Before disposing of the appliance, please remove the
battery cartridge and dispose of it separately.
Figure
Slide open the battery compartment in the direction
of the arrow.
Cut through the retaining tape and remove the
battery cartridge from the appliance.
Cut through the power cables and, to ensure safety,
bind and insulate each of the cable ends with tape.
13
12
11
10
9
BKS4 dry (12/11) (Innenteil) 21.12.2011 15:20 Uhr Seite 7
27
Emptying the dust container
In order to achieve the best possible vacuuming
results, the dust container should be emptied after
every use.
Fig.
Remove the hand-held cordless vacuum cleaner from
the hand-held vacuum cleaner (see fig. 7)
Using the release button, unlock the dust container
and remove it from the motor unit.
Fig.
Use the handle to remove the motor protection filter
and foam filter from the dust container.
Empty the dust container.
Cleaning the filter
Fig.
Unlock the dust container. Remove the motor
protection filter and foam filter from the dust
container (see fig. 11 and 12)
Clean the motor protection filter and foam filter by
tapping out the dirt.
If there are heavy deposits of dirt, the filter and dust
container can be washed out.
Then wipe out the dust container with a dry cloth;
allow the filter to dry completely before re-inserting
it.
Fig.
a)
Insert the motor protection filter and foam filter into
the dust container.
a) Fit the dust container onto the motor unit and lock it
into place.
New filters can be obtained from our after-sales
service, if required.
Cleaning the floor tool
Before carrying out any maintenance, switch off the
vacuum cleaner and disconnect it from the charging
cable.
Fig.
Release the brush roller using the release button and
pull it sideways out of the floor tool.
Using the groove provided, cut through threads and
hairs wound round the rollers with scissors and then
remove them.
Push the brush roller in sideways along the guide rod
in the floor tool and lock in place using the release
button.
!
Caution: The floor tool must only be put into
operation with the brush roller fitted.
13
14
11
12
15
Caution!
Floor tools are subject to a certain amount of wear,
depending on the type of hard floors you have
(e.g. rough, rustic tiles). Therefore, you must check
the underside of the floor tool at regular intervals.
Worn undersides of floor tools may have sharp edges
that can damage sensitive hard floors, such as parquet
or linoleum. The manufacturer does not accept any
responsibility for damage caused by worn floor tools.
Replacing the battery pack
The battery pack can be easily removed
from the appliance and replaced.
Fig.
Release the battery pack in the direction of the
arrow and remove it from the appliance.
Insert the new battery pack and lock it in place.
A new or additional battery pack can be obtained from
our after-sales service by stating the appliance type.
!
Caution: The appliance must only be charged and
operated with a battery pack that has the same
voltage as the appliance itself.
Please refer to the voltage specified on the battery
pack and on the appliance.
Care
Before cleaning the cordless vacuum cleaner or hand-
held vacuum cleaner, they must be switched off and
disconnected from the charging cable. They can be
cleaned using a standard commercially-available plastic
cleaner.
!
Do not use a scourer, glass-cleaning agent or multi-
purpose cleaning products. Never immerse the
vacuum cleaner in water.
Disposing of the battery pack
Before disposing of the appliance, remove the battery
pack and dispose of it in an environmentally friendly
way. (see fig. 16)
16
en
BBH2...readyy'y (Innenteil)_BBH2...readyy'y 29.11.14 16:28 Seite 27
1
2
3
4
5
6
7
8
5 6