Bosch BCR1 Series, Инструкция по эксплуатации

Страница: 80 / 300

80
Cleaning programmes and operating modes en
MAP cleaning programme
Fig.
11
With the MAP cleaning programme, the robot vacuum
moves over and cleans the map of your house in a fixed
cleaning pattern. You will need to create and confirm
this map using the Home Connect app via the robot
vacuum first.
We recommend that you leave all doors open when cre-
ating a new map. We also recommend having the robot
explore a new map starting from the charging station.
The robot vacuum will return to its original position af-
ter exploring a map in the MAP cleaning programme.
When you place the robot vacuum in a room and then
start the MAP cleaning programme, the robot vacuum
will orientate itself before starting cleaning. The same
thing will happen if you lift up the robot vacuum while
it is cleaning and then resume the paused MAP cleaning
programme.
When you use the buttons on the robot vacuum, the ro-
bot vacuum will check whether the most recently saved
map matches the room to be cleaned before starting.
If the room is the same as the available map, the robot
vacuum will start cleaning. If it is not, the cleaning pro-
gramme will be cancelled.
When operating the robot vacuum using the Home Con-
nect app, you can select one or more rooms for clean-
ing individually. You can also mark particular areas as
"no-go zones". The robot vacuum will not enter these
areas when cleaning and they will be missed out.
The cleaning programme can be used in the Silent, Eco
and Power operating modes.
You can find detailed information about the operating
modes in the "
Operating modes " section. Fig.
17
If the battery level is low, the robot vacuum will return
to the charging station. The programme will be resumed
once it has recharged. This will only happen once – if
the battery drains a second time, the robot vacuum will
return to the charging station and stop cleaning.
11