Bosch BCR1 Series, Инструкция по эксплуатации

Страница: 88 / 300

88
Home Connect en
Connecting to a wireless local area network manually
Note
The robot vacuum sets up its own wireless local area
network for the end device to access.
Fig.
22
t
Deactivate mobile data and activate wireless net-
working on your mobile device.
a) Connect your mobile device to your home network.
b) Open the Home Connect app and select [Add appli-
ance].
t
Confirm the important information shown in the app
and select [Next].
t
Wait for the app to check the requirements for con-
necting the appliance.
t
If you have added other Home Connect appliances to
your home network already, select [+] next to "Add
another home appliance". If you have not added any
Home Connect appliances to your home network yet,
step-by-step instructions for connecting the appli-
ance will appear. Select [Start]. If prompted to, en-
ter the password for your wireless local area network
and select [Next].
c) If the Home Connect app requires connection to be
started on the appliance, briefly press the "Wireless
network" button on your robot vacuum. The button
will flash yellow for confirmation.
t
iOS: Now select [Next] and connect to "Home Con-
nect" as described there. You will need to enter the
password for your wireless local area network and
confirm by selecting [Next].
t
Wait until the "Wireless network" button lights up
green and three beeps indicate that connection has
been successful. This may take a few minutes.
t
Android: Now select [Next].
d) The robot vacuum will connect to the app.
t
Select [Next].
t
Set the time function you want in the app and confirm
with [Done].
22
a
b
c
d