Bosch Basic module TS-AC B1-M2-1X Скачать руководство пользователя | Manualshive

Страница: 10 / 60

background image

6/54

Safety instructions | Automax 100 | Basic module TS-AC B1-M2-1X

Bosch Rexroth AG | 04.2021 | DOK-SUPPL*-TS-AC B1-M2-ITRS-EN-P

2.3

Improper use

Any use deviating from the intended use is improper and thus not admissible.

Bosch Rexroth AG does not assume any liability for damage caused by improper use. The
user assumes all risks involved with improper use.

Improper use of the product is defined as in particular:



Exposure to operating conditions which do not satisfy the prescribed environmental
conditions. Examples of prohibited operation include operation under water, under
extreme temperature variations or extreme maximum temperatures

2.4

Qualification of personnel

2.4.1

General informations

Basic mechanical and electric knowledge as well as knowledge of corresponding technical
terms is required for assembly, commissioning, maintenance (incl. service, inspection,
repair) and disassembly. To ensure operational reliability, these activities may therefore only
be performed by a qualified expert or an instructed person under the supervision of an
expert. Experts are those who are able to recognize potential dangers and apply the
appropriate safety measures due to their professional training, knowledge and experience,
as well as their understanding of the relevant conditions pertaining to the work to be
undertaken. An expert must observe the relevant specific professional rules.

2.4.2

Teaching

At this product, trainees may only work:



under direct supervision



after being given appropriate instructions

by an instructor or trained member of staff.

2.4.3

Trained personnel

For the supervision during the exercises, trained personnel may also be used.
These are qualified people who were instructed and briefed in relation to:



Tasks ordered



Possible dangers in the event of improper use



Safeguards and protective measures

2.5

General safety instructions



Observe the valid regulations on accident prevention and environmental protection



Observe the safety regulations and provisions of the country where the product is
implemented/used



Exclusively use Rexroth products in technically perfect condition.



Observe all notes on the product



Persons permitted to assemble, operate, disassemble or maintain Rexroth products must
not be under the influence of alcohol, other drugs or medication which can impair
responsiveness when doing so



Only use spare parts approved by the manufacturer in order to exclude hazards to
persons due to unsuitable spare parts



Comply with the technical data and environmental conditions specified in the product
documentation

«
...
8
9
10
11
12
...
»

Содержание Basic module TS-AC B1-M2-1X





























































Отзывы:

Нет отзывов

Похожие инструкции для Basic module TS-AC B1-M2-1X

Бренд: GE Страницы: 24

Бренд: Keiser Страницы: 2

Бренд: ECA Страницы: 3

Бренд: Nautilus Страницы: 12

Бренд: Panasonic Страницы: 174

Бренд: idiag Страницы: 10

Бренд: Bandit Страницы: 136

Versaflo S Series

Бренд: 3M Страницы: 11

DBI Sala EXOFIT

Бренд: 3M Страницы: 32

Бренд: 3M Страницы: 8

Бренд: Accurate Bio-Medical Technology Страницы: 35

Бренд: Facsimile Страницы: 16

Бренд: Raymarine Страницы: 124

Бренд: Raymarine Страницы: 192

Бренд: Tanaka Страницы: 20

Бренд: Tandem Страницы: 80

Бренд: Tanco Страницы: 4

Smart Plus PHT-35LHS

Бренд: Vatech Страницы: 190

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды