Bosch Basic module TS-AC B1-M2-1X, Руководство по эксплуатации

Страница: 23 / 60

About this product | Automax 100 | Basic module TS-AC B1-M2-1X 19/54
Bosch Rexroth AG | 04.2021 | DOK-SUPPL*-TS-AC B1-M2-ITRS-EN-P
For voltage supply, an external power supply unit with DC 24 V and 6.5 A (not included in
the scope of delivery) should generally be used.
ATTENTION! Depending on the application, it may be necessary to remove the connector
(

). Observe the specifications of the modules to be combined with this basic module.
Safety socket (GND)
Safety socket (+24V/U
LS
)
Safety socket (-1XG4)
Safety socket (+24V/U
A
)
„Connector XVB-4/19“ symbol
Symbol „Contact protected measuring
line“ symbol
Voltage supply of basic module
5.2.2 Voltage supply for extension modules
For attachment of extension modules, 2 slots are available. Each slot is assigned 3 safety
sockets for voltage supply of extension modules.
The following voltages are supplied:

GND (blue safety socket)

U
LS
DC 24 V (red safety socket)

U
A
DC 24 V (green safety socket)

Information on the attachment of extension modules can be found in chapter „ Extension
and modification “ as of page [

45 ].
Slot 1 for extension module
Voltage supply for extension module
(slot 1)
Slot 2 for extension module
Voltage supply for extension module
(slot 1)
Slots for extension modules
Attached extension modules are secured via the two knurled screws of the respective slot.
5.2.3 NETGEAR Ethernet-switch
The following information on the Ethernet switch are an excerpt of the data sheet and the
installation manual of the NETGEAR Ethernet switch.