Faults – what to do?
en-us
23
3
Faults – what to do?
Faults – what to do?
Before you call customer service, use this table to check whether you can rectify the fault yourself.
--------
Temperature differs greatly from the set value.
Switch off appliance for 5 minutes.
"Switching off and disconnecting the appliance" on page 13
If the temperature is too warm, check temperature again after a cou-
ple of hours.
If the temperature is too cold, check temperature again on the follow-
ing day.
Displays do not light up.
The power plug has not been inserted properly.
Connect the power plug.
The fuse has tripped.
Check the fuses.
The power has failed.
Check whether the power is on.
Display indicates E….
The electronics have detected an error.
Please contact customer service.
A warning signal sounds and the alarm button is lit.
Press
alarm
button. Alarm is switched off.
Appliance door is open.
Close the appliance door.
Ventilation openings have been covered.
Clear the ventilation openings.
Large quantities of fresh food have been placed inside the appliance. Do not exceed maximum freezing capacity.
Display flashes, warning signal sounds and alarm button is lit.
Press
alarm
button. Alarm is switched off.
Appliance door is open.
Close the appliance door.
Ventilation openings have been covered.
Clear the ventilation openings.
Large quantities of fresh food have been placed inside the appliance. Do not exceed maximum freezing capacity.
Display flashes.
The temperature in the freezer compartment was too warm.
After the
alarm
button is pressed, the warmest temperature reached
in the freezer compartment is displayed for 5 seconds. Press
alarm
button. The display stops flashing.
Appliance is not cooling, display and lighting are lit.
Showroom mode switched on.
Start the appliance self-test.
"Appliance self-test" on page 24
When the program has ended, the appliance switches over to normal
operation.
It is too warm or too cold in the cool-fresh compartment.
The standard setting has been set too high or low (e.g. there is frost in
the cool-fresh compartment).
You can set the temperature in the cool-fresh compartment to any-
where 37°F and +27°F (+3°C and –3°C). The temperature
in the cool-fresh compartment is set to +32°F (0°C) by default.
1.
Press and hold
super
refrigerator compartment button until the
refrigerator compartment temperature display flashes.
2.
Press
¾
/
¿
refrigerator compartment button to change the set-
ting.
The set temperature is saved after one minute.
Содержание B0**IB*****
Страница 75: ... 8001114098 8001114098 9906 en us fr ca es mx ...
