45
Cleaning water inlet
strainers
This is necessary if very little or no water flows into the
washer-dryer.
First, reduce the water pressure in the inlet hose:
■
Turn off the tap.
■
Turn the programme selector to any programme
(except
Spin
Í
/
Drain
[
).
■
Touch the
Start/Pause
A
button, and allow the
programme to run for approx. 40 seconds.
■
Turn the programme selector to
Off
.
Cleaning the strainer at the
water tap
■
Disconnect the hose fror the water tap.
■
Rinse the strainer under flowing water.
■
Connect the hose.
Cleaning the strainer on the
washer-dryer
■
Disconnect the hose fror the back of the
washer-dryer.
■
Pull out the strainer and rinse under running water.
■
Insert the strainer and reconnect the hose.
■
Turn on the water tap and check whether water is
still discharged. If water is leaking, check that the
filter is correctly seated.
■
Turn off the tap.