44
Cleaning the drain
pump
This is necessary if the washing solution has not been
completely drained. The pump is blocked by either
loose debris or fluff which accumulates if fluff-giving
fabrics are washed.
Drain the water
(Up to 20 litres. Have a suitable container ready.)
m
Risk of scalding!
Allow the hot water to cool down beforehand. Keep
children and pets away.
■
Turn the programme selector to
Off.
■
Fold down the cover panel...
■
Remove the drain hose from its holder and pull the
hose out of the housing.
■
Pull down the closing cap and allow the washing
lye to flow into a suitable container.
■
Push up the closing cap and place the drain hose
back in its holder...
■
Carefully remove the pump cap.
■
Remove any loose debris/fluff from inside the
pump and clean the pump. The pump impeller
must be able to rotate.
Clean any residual lye or fluff from the thread of the
pump cover and pump housing.
■
Attach and tighten the pump cap.
■
Attach and close the cover plate.
To prevent unused detergent from flowing into the
drain during the next wash cycle:
■
Pour 1 litre of water into chamber
II
.
■
Select the
Drain
[
programme.
