61
Transport, e. g.
whenmoving
Before transporting the washer-dryer:
– Turn off the tap.
– Reduce the water pressure in the water inlet hose
(refer to page 45).
– Drain any residual washing solution (refer to page
44.)
– Disconnect the washer-dryer fror the mains.
– Dismantle the supply and drainage hose.
– Install transportation protection devices.
Having transported the appliance and ensured proper
installation and connection, allow the
Drain
[
programme to run through before starting the first
wash programme.
Transporting the washer-dryer:
Preparing and inserting the
transport bolts
■
Remove the 4 covers
C
.
■
Remove the rear cover
D
and prepare the transport
bolts.
■
Insert and tighten the transport bolts.
D
C