Bosch Autodome Inteox 7000i-2MP, Руководство по установке

Страница: 21 / 44

AUTODOME inteox 7000i - 2MP (in-ceiling) Installing the In-Ceiling Mount | en 21
Bosch Security Systems
Installation Manual
2021-08 | 1.4 |
!
Caution!
The In-ceiling dome is provided with tether points on each side of the housing. To prevent
injury, attach a safety wire from a secure anchor point above the ceiling to a tether point on
the dome housing. See below for an illustration.
7.7 Secure Housing to Ceiling
The In-ceiling Housing is secured to the ceiling by two (2) screw clamps.
1.
Insert the In-ceiling Mount Assembly through the hole in the ceiling.
2. Tighten both clamps using a #2 Phillips screwdriver, to secure the housing to the ceiling.
mm
inches
40 mm
1.57 in.
MAXIMUM CEILING
6.5 mm
0.26 in.
MINIMUM CEILING
Figure 7.5: Secure camera to ceiling
1 Tether Point 4 Ceiling Clamp
2 Ceiling Clamp 5 Rotate Clockwise to Engage Clamp