Bosch AUTODOME 4000 mini, Руководство по эксплуатации

Страница: 26 / 90

Numbe
r Description
3 Camera base
4 O-ring
5 #8 x 32 screw
6 Safety strap (will hold item #7 dome cover for
easy installation)
7 Dome cover
8 M4 x 12 Torx screw
!
Caution!
To prevent humidity problems, the camera must be installed in
dry conditions, and the cable leads should be sealed after they
are connected.
1. Determine a secure location that can support the weight of
the dome.
2. Use the template (refer to , page 25, item 1) to mark the
locations of the four screw holes and the cable conduit.
3. Pre-drill the four screw holes wide enough to accept the
plastic anchors.
4. Cut out the entire cable conduit hole.
5. Insert the four plastic anchors (item 2) inside the pre-
drilled holes.
6. Route the cables from the camera through the conduit in
the ceiling.
7. Remove the dome cover (item 6) from the camera base
(item 3).
26 en | Installing a Surface Mount
AUTDOME 4000 Mini
PTZ Dome
2013.4 | | Bosch Security Systems, Inc.