AMC2 4W | Installation manual
Installing | en
31
Bosch Sicherheitssysteme GmbH
F.01U.024.965 | V 0.1 | 2006.03
5.5
Connecting Power Supply
Connect the power supply to the 7-pin pluggable screw connec-
tor labeled with POWER on the upper case.
Fig. 5.6
Location of the power supply connector
An external power supply (10 - 30V DC) must be connected for
internal electronics at pin 1 (positive) and pin 3 (negative) of
the pluggable screw connector.
An additional power supply (12V DC) for peripheral devices (i.e.
card readers and door openers) must be connected at pin 6
(positive) and pin 7 (negative).
i
NOTE!
A complete connection diagram is shown in chapter
Section 7.1 Connecting Diagrams
of this documentation.