English–
2
Bosch eBike Systems
0 275 007 XPX | (12.6.17)
Product Description and
Specifications
Product Features
The numbering of the product features refers to the illustra-
tions on the graphics pages.
All representations of bike components, with exception of the
battery packs and their holders, are schematic and can devi-
ate from your eBike.
In addition to the functions shown here, changes to software
relating to troubleshooting and functional enhancements may
be introduced at any time.
1
Operation and charge-control indicator
2
On/Off button
3
Key of the battery pack lock
4
Battery-pack lock
5
Upper holder of the standard battery pack
6
Standard battery pack
7
Bottom holder of the standard battery pack
8
Battery charger
9
Socket for charge connector
10
Charge socket cover
Technical Data
Assembly
Place down the battery pack only on clean surfaces.
In
particular, avoid soiling the charge socket and the con-
tacts, e. g. by means of sand or soil.
Checking the Battery Pack Before Using for the
First Time
Check the battery pack before charging it or using it with your
eBike for the first time.
For this, press the On/Off button
2
to switch on the battery
pack. When no LED of the charge-control indicator
1
lights up,
the battery pack may be damaged.
When at least one, but not all LEDs of the charge-control indi-
cator
1
is lit, then fully charge the battery pack before using
for the first time.
Do not attempt to charge or use a damaged battery
pack.
Please refer to an authorised Bosch eBike dealer.
Charging the Battery Pack
Use only the Bosch charger provided with your eBike or
an identical original Bosch charger.
Only this charger is
matched to the lithium-ion battery pack used in your eBike.
Note:
The battery pack is supplied partially charged. To en-
sure full battery pack capacity, completely charge the battery
pack in the charger before using for the first time.
For charging the battery pack, read and observe the operating
instructions of the charger.
The battery can be charged at any level of charge. Interrupting
the charging process does not damage the battery pack.
The battery pack is equipped with a temperature control in-
dicator, which enables charging only within a temperature
range between 0 °C and 40 °C.
When the battery pack is not
within the charging-tempera-
ture range, three LEDs of the
charge-control indicator
1
flash. Disconnect the battery
pack from the charger until its
temperature has adjusted.
Do not connect the battery pack to the charger until it has
reached the allowable charging temperature.
Lithium-ion battery pack
PowerPack 300
Article number
0 275 007 549
Rated voltage
V=
36
Rated capacity
Ah
8.2
Energy
Wh
300
Operating temperature
°C
–10...+40
Storage temperature
°C
–10...+60
Allowable charging temperature
range
°C
0...+40
Weight, approx.
kg
2.5
Degree of protection
IP 54 (dust and
splash water
protected)
OBJ_BUCH-3216-002.book Page 2 Monday, June 12, 2017 11:11 AM
