51
Washing solution is not completely
drained.
Pumped blocked by foreign objects. Clean the pump (refer to page 45).
Fluff-producing laundry was
washed. The water drainage pipe or
drain hose is blocked.
Clean drainage pipe and/or
drainage hose.
Water runs out from under the
appliance.
Screw fitting of the inlet hose is
leaking.
Tighten the screw-fitting.
Drainage hose is leaking.
Replace the drain hose.
Foam comes out of the detergent
drawer. The
*
symbol is displayed
when the overdosage of detergent
is detected.
Too much detergent or detergent
not suitable for use in washing
machines used.
Mix 1 tablespoon of fabric softener
with
½
litre of water and pour into
chamber
II
of the detergent
dispenser.
Reduce detergent dosage for next
wash cycle or use detergent which
is suitable for use in washing
machines.
The washing has not been spun
correctly.
Large laundry items have become
entangled and are not evenly
distributed in the drum.
For safety reasons, the high-speed
final spin cycle was automatically
cancelled.
Do not put only large items in the
drum.
Spin result unsatisfactory.
Reduced Ironing
Q
button touched - for reduced spin speed see page
27.
The
Rinse
P
or
Spin
Í
programme selected maximum spin speed: see
page 26.
Spin cycle actuated several times. Not a fault.
Unbalanced load detection system is attempting to compensate the
imbalance by spinning the washing several times.
Washing result not satisfactory.
Soiling is greater than expected or
recommended load has been
exceeded.
Select suitable programme and
touch the
Wash Plus
È
button or
reduce load.
Detergent was underdosed.
Dose detergent according to the
manufacturer's instructions.
Detergent residue on the washing. Some phosphate-free detergents
contain water-insoluble residue
which may appear as light stains on
the washing.
Select
Rinse
immediately
or
brush out the washing after drying.
Probleme
Cause
Remedial action