13
Before using your washer-dryer for the first
time
Preparing your
washer-dryer
Attention
The washer-dryer must have been installed and
connected properly (refer to page 55).
²
The washer-dryer was tested before leaving the
factory. To remove any water left over from
testing procedures, the first washing cycle should
be carried out
without
laundry in the machine.
■
Turn the tap on.
■
Pull out the detergent drawer all the way.
■
Pour approx. 1 litre of water into chamber
II
of the
detergent dispenser.
■
Half fill the measuring beaker with detergent and
pour into chamber
II
.
²
Do not use any special detergents for delicates or
woollens (excessive foam).
■
Close the detergent drawer.
■
Close the washer-dryer door.
■
Set the programme selector to
Cottons
F
90 °C
, see page 32.
■
Touch the
Start/Pause
P
button.
The programme starts.
The programme ends when all symbols in the upper
row of the dispaly field go out, the progress bar is
completely filled and the programme duration is on
-0-
:
■
Turn the programme selector to
Off
.