10
Programme status display
The first row of symbols and the progress bar below
form the programme status display. The progress bar
consists of a frame and several segments.
When the programme has started, the almost empty
bar is displayed which fills up with segments from left
to right while the programme is running.
The symbols indicate the programme section which is
running.
At the end of the programme all symbols have gone
out and the progress bar is full.
Low water pressure
The automatic system detects the press of water
supply and displays
if the water pressure is low.
*
Overdosage
The automatic safety system detects excessive froth in
the appliance due to a highly frothing detergent or an
overdosage. This is indicated in the display field by the
*
symbol. Dispense less detergent for the next wash
with similar items of washing (same degree of soiling
and wash load).
Overdosage of detergent may cause excessive froth
formation and impair the washing and rinsing results.
A rinse cycle is automatically run.
Other displays at this location:
24th* Finish in time
Selected finish in time
-0-
End of programme or
- - -
End of programme without
final spin or
PAUS Pause
OPE
n
Door can be opened
F:16* Fault displays
See page 49
Rinse cycle
Not on if there is no Rinse cycle
and additional rinse cycle was
not selected
}
Door open
On if the door can be opened
during “Pause’’ period
H
Pause
On if the programme in pause.
*
Example of the display
Display
Notes
