Bosch 3 842 999 904 RV 1 страница 75 Скачать руководство пользователя

Страница: 75 / 76

Technical Data

75/76

3 842 358 724/2013-04, MIT: BS 2/C-… + BS 2/R-…,

Bosch Rexroth AG

16 Technical Data

• For dimensions, see the sales catalog TS 2plus, 3 842 531 138.

• Maximum load/section load:

– BS 2/C-100 belt section:

max. 100 kg / 1.0 kg/cm of support surface length

– BS 2/C-250 belt section:

max. 250 kg / 1.0 kg/cm of support surface length

– BS 2/C-H belt section:

max. 400 kg / 2.0 kg/cm of support surface length

– BS 2/R-300 belt section:

max. 300 kg / 1.5 kg/cm of support surface length

– BS 4/R-300 belt section:

max. 300 kg / 1.5 kg/cm of support surface length

– BS 2/R-700 belt section:

max. 700 kg / 1.5 kg/cm of support surface length

– BS 4/R-700 belt section:

max. 700 kg / 1.5 kg/cm of support surface length

– BS 2/R-H belt section:

max. 1200 kg / 2.0 kg/cm of support surface length

– BS 2/R-V-1200 belt section: max. 1200 kg / 1.5 kg/cm of support surface length

• Noise emissions: < 70 dB (A)

16.1 Ambient conditions

• The transfer systems have been designed for stationary use in a location

that is protected from the elements.

• Operating

temperature

+5°C to +40°C
–5°C to +60°C with 20% reduced load

• Storage temperature

–25°C to +70°C

• Relative humidity

5% to 85%

• Air pressure

> 84 kPa, appropriate height < 1400 m above sea level

• Permissible ﬂ oor load: 1000 kg/m

• The load values of the electrical drives are reduced by 15%

when the system is set up in a location with an altitude > 1400 m.

• Avoid molds, fungi, rodents, and other vermin.

• Do not install or operate near industrial systems with chemical emissions.

• Do not install or operate near sandy or dusty sources.

• Do not install or operate in areas that are regularly jarred by high forces

caused by e.g. presses or heavy machinery.

• Resistant to many common media used in production such as water,

mineral oil, grease, and detergents. Contact your Rexroth representative

if you have any doubts about resistance to speciﬁ c chemicals, such as

test oil, doped oils, aggressive detergents, solvents, or brake ﬂ uid.

• Avoid long-term contact with acidic or basic reacting materials.

GLISH

358724_2013_04_EN.indd 75

27.05.2013 13:08:20

Содержание 3 842 999 904 RV 1













































































Результаты поиска

Содержание 3 842 999 904 RV 1

Отзывы:

Похожие инструкции для 3 842 999 904 RV 1

Бренды по названию

Популярные бренды

Bosch 3 842 999 904 RV 1, Руководство по сборке

Результаты поиска

Содержание 3 842 999 904 RV 1

Отзывы:

Похожие инструкции для 3 842 999 904 RV 1

Бренды по названию

Популярные бренды