Bosch 21-17-3234, Перевод оригинальной инструкции по эксплуатации

Страница: 136 / 262

MY22Z01 - 12_1.0_25.07.2022
135
Operation
6.18 Using the on-board computer
6.18.1 Using the USB port
The USB port can be used to operate external
devices which can be connected using a standard
micro A/micro B USB 2.0 cable.
1 Open the protective flap on the USB port.
2 Replace the protective flap after using the USB
port.
6.18.2 Switching on the on-board computer
 Press the On-Off button (on-board computer)
briefly.
 The electric drive system is switched on.
6.18.3 Switching off the on-board
computer
If the on-board computer is not inserted into its
mount, it will switch off automatically after one
minute to save energy if no button is pressed.
 Press the On-Off button (on-board computer)
briefly.
 The electric drive system is switched off.
Crash caused by distraction
A lack of concentration while riding increases the
risk of an accident. This may cause a crash with
serious injuries.
 Never allow yourself to be distracted by the
on-board computer.
 Stop pedelec if you want to make inputs on the
on-board computer other than change the
level of assistance. Only enter data when the
bicycle is stationary.
Notice

Do not use on-board computer as a handle.
The on-board computer may become
irreparably damaged if you use it to lift the
pedelec.
 Remove the on-board computer from its mount
if the pedelec is not going to be used for
several weeks. Store the on-board computer
away safely in a dry environment at room
temperature.
The internal on-board computer battery
discharges when it is not in use. This can cause
damage to the internal on-board computer
battery.
 Charge internal on-board computer battery
every 3 months for at least 1 hour.
CAUTION
!
Notice
Any moisture penetrating through the USB port
may trigger a short circuit in the on-board
computer.
 Regularly check the position of the rubber
cover on the USB port and adjust it as
necessary.