English–
7
1 270 020 XBI | (19.4.17)
Bosch eBike Systems
Power Supply of External Devices via
USB Connection
With the USB connection, it is possible to operate and charge
most devices whose power supply is possible via USB (e.g.,
various mobile phones).
Prerequisite for charging is that the on-board computer and a
sufficiently charged battery pack are inserted in the eBike.
Open the protective cap
8
of the USB port on the on-board
computer. Connect the USB connection of the external device
to the USB port
7
on the on-board computer using the USB
charging cable Micro A – Micro B (available from your Bosch
eBike dealer).
Once the consumer has been disconnected, the USB connec-
tion must be sealed again carefully with the protective cap
8
.
A USB connection is not a waterproof plug-in connec-
tion. When riding in the rain, an external device must
not be connected and the USB connection must be com-
pletely sealed with the protective cap 8.
Maintenance and Service
Maintenance and Cleaning
Do not immerse any components, including the drive unit, in
water or clean them with pressurised water.
Clean your on-board computer using a soft cloth dampened
only with water. Do not use any detergents.
Have your eBike system checked by an expert at least once a
year (including mechanical parts, up-to-dateness of system
software).
The bicycle manufacturer or dealer may also base the service
date on the distance travelled and/or a period of time. In this
case, the on-board computer will show you every time it is
switched on that the service date is due in the text indication
d
by displaying
“
Service”
for 4 s.
For service or repairs on the eBike, please refer to an author-
ised bicycle dealer.
After-sales Service and Application Service
In case of questions concerning the eBike system and its com-
ponents, please refer to an authorised Bosch eBike dealer.
For contact data of authorised Bosch eBike dealers, please
refer to
www.bosch-ebike.com
605
Battery pack temperature error
The eBike is outside of the permissible temperature range. Switch off the
eBike system and allow the drive unit to either cool down or heat up to the
permissible temperature. Restart the system. If the problem persists,
contact your Bosch eBike dealer.
605
Battery pack temperature error while
charging
Unplug the charger from the battery pack. Allow the battery pack to cool.
If the problem persists, contact your Bosch eBike dealer.
606
External battery pack error
Check the wiring. Restart the system. If the problem persists, contact
your Bosch eBike dealer.
610
Battery pack voltage error
Restart the system. If the problem persists, contact your Bosch eBike
dealer.
620
Charging error
Replace the charger. Contact your Bosch eBike dealer.
640
Internal battery pack error
Restart the system. If the problem persists, contact your Bosch eBike
dealer.
655
Multiple battery pack errors
Switch off the eBike system. Remove the battery pack and reinsert it.
Restart the system. If the problem persists, contact your Bosch eBike
dealer.
656
Software version error
Contact your Bosch eBike dealer so that he can perform a software
update.
7xx
Transmission error
Please observe the operating instructions provided by the transmission
manufacturer.
No display Internal error of the on-board
computer
Restart your eBike system by switching it off and back on.
Code
Cause
Corrective Measure
OBJ_BUCH-2795-002.book Page 7 Wednesday, April 19, 2017 11:55 AM