DAMPERS ASSEMBLY
1. Put the vehicule on a stand
2. Remove the wheel
3.
Disconnect all components a�ached to the shock
absorber (an�-roll bar, sensors, etc)
4. Loosen the upper and lower moun�ng screw
before removing the original shock absorber from
the vehicle
5. Install the BOS shock absorber in place of the
original one. Then �ghten the upper and lower
moun�ng screws
6. Repeat the opera�on on all 4 wheels of the
vehicle
The vehicle is ready to be placed on its wheels
7. Once the vehicle is on the ground, you can adjust
the ride height of the vehicle to your wishes by
preloading or unloading your spring (varia�on of
the x value). To do this, you can use a pin wrench or
two pin drivers for example. Remember to note and
keep this value
If you loosen the preload nut, you decrease the ride
height of the car and vice versa if you �ghten it. This
adjustment is not considered as a tuning way. It is an
adjustment that depends mainly on the use and the
feeling of the driver.
• We strongly recommend to let a professional
install this product
• Wash the vehicule before installing this product
