SAFETY INSTRUCTIONS
TOOLS
GENERAL WARNINGS
Your suspension is an important component that has a direct
influence on the handling of your vehicle.
This manual must be consulted before using the BOS
suspension and during its en�re service life.
If necessary, or for any service work, please contact an
authorised BOS Suspension Centre.
A�er installa�on, test your vehicle at low speed to ensure
that the system is working properly.
CAUTION opera�ons may impair your safety or cause damage to your suspension. Be sure to take note of these
warnings.
IMPORTANT INFORMATIONS
These indica�ons are intended to allow you to op�mize the opera�ons described in this manual or op�mize the
performance of your suspension. Do not a�empt to disassemble your shock absorber; limit yourself to the
opera�ons described in this manual. Since your shock absorber is assembled under pressure, disassembling it may
cause injury. Disassembling your shock absorber may cause irreversible damage to it. Contact an authorized BOS
service center for maintenance.
To carry out adjustments and rou�ne maintenance of your suspension kit, you will need the following tools :
TOOLS
USE
FIGURE
5 and 6mm pin spanner
Spring preload
-
10mm Socket
High speed rebound
3mm Allen key
Low speed bump and
rebound
14mm Socket
High speed bump
