Bort 91272263, Руководство пользователя, Страница: 9 / 36

9
• At the end of its life, the appliance should be rendered
unusable, then disposed of in an appropriate manner .
• Plastic bags and films must be kept out of the reach of
children before disposal (risk of suffocation) .
• Do not pour any flammable substances or substances
containing alcohol onto the filters (filter bag, motor pro-
tective filter, exhaust filter, etc .) .
CAUTION
1.
The vacuum has multi functions, please read the man-
ual carefully before operating and select suitable accesso-
ries for different cleaning purposes;
2.
Don’t leave when the vacuum is running . Please power
off and take off the plug after the cleaning;
3.
Home use and indoor use only;
4.
The vacuum is not suitable for children;
5.
Only supplied accessories can be used;
6.
Any damage, please contact aftersales office for profes-
sional service;
7.
Check the suction hose if any blockage before opera-
tion;
8.
Please power off the vacuum immediately if any acci-
dents;
9.
Make sure the filtrations are fixed correctly before vac-
uuming .
CLEANING OPERATION
Carpet cleaner version:
1.
Remove the dust bag .
2.
Don’t shake the vacuum hardly . Use on flat surface .
3.
Stop the vacuum immediately if any water or solution
bubble sprays out . Check if too much water or solution is
collected in . Clean the water tank and floater assembly .
4.
Only low bubble or no bubble solution can be used .
5.
Solution tank capacity is about 3 .5L .
6.
Full tank solution can last working for 20-25 minutes .
Please care about the solution level .
OPERATION PROCESS:
1.
Release tank buckle, take out the top cover and re-
move the dust bag (fig. 2) .
2.
Hold the top hand, take off the floater frame as per di-
rection instruction, check the floater frame, strainer, filter,
floater bottom, HEPA and check whether all are fixed in
right position
(fig. 3) .
3.
Assemble the floater frame according to direction
instruction . Put the top onto the water tank, fix the tank
buckle
(fig. 4) .
4.
Insert the main hose adapter, rotate according to di-
rection instruction and fix firmly . Then fix the front solu-
tion nozzle in anticlockwise
(fig. 5)
.
5.
Connect two parts aluminum tubes together with the
solution nozzles (fig. 6) .
6.
Connect the solution/water floor brush/solution noz-
zle with the aluminum tube/solution nozzle (fig. 7) .
7.
Release solution tank buckle and take off the solution
tank . Read the solution IM and fill the solution and water
in . Park the solution tank onto the vacuum bottom
(fig. 8) .
8.
Plug and power on the vacuum first, then switch on
solution pump . Power is adjustable . When vacuuming,
check if solution pump working, solution speed, floater
protection, water/solution bubble level (no exceeding the
MAX line)
(fig. 9)
.
9.
Full solution tank can last 20-25 minutes working .
Check often the solution level as per the tank scale . Pow-
er off the pump for 30 seconds before switching off the
vacuum
(fig. 9) .
10.
After vacuuming, take out the solution nozzles and
solution tank for cleaning (fig. 10) .
11.
Take out the top vacuum part, hold the handle and
take off the floater frame (fig. 11) .
12.
Take out the HEPA, strainer and floater, take off the
floater bottom anticlockwise . Clean the water in the float-
er bottom if any . Wash the sponge filter and HEPA, then
dry in the sunshine for next use . Wash the floater assembly
and water tank
(fig. 12) .
13.
Once floater is sucked up to the top, power off the ma-
chine and clean the floater frame, filters and water tank
before next use .
14.
Airflow adjustable on hose handle . Clean away the
balance solution after cleaning is finished . Take off the rear
blow window and clean the exhaust sponge filter .
15.
Disassemble all the accessories from the machine af-
ter use . Clean and dry for next use .
REAR BLOW FUNCTION:
Caution: Don’t switch on solution pump to
avoid pump overheating.
1.
Take out solution tank and take off exhaust filter cover;
2.
Fix the hose in;
3.
Plug and switch on the machine for blowing;
4.
Take out the hose and fix the exhaust filter cover after
use .
WET & DRY VACUUM CAUTION:
1.
Don’t switch on solution pump;
2.
Better take off the solution tank;
3.
Don’t shake the vacuum hardly . Use on flat surface;
4.
Stop the vacuum immediately if any water sprays out .
Check if too much water is collected in . Clean the water
tank and floater assembly;
5.
Change the dust bag if it’s broken .