Borroughs BASIC PRO SERIES, Руководство по сборке

Страница: 10 / 17

10
IF YOU’RE ASSEMBLING A 2
nd
PART 10FT WORK BENCH GO TO SECTION #4 BEFORE STARTING STEP
#7
STEP 7:
DOOR ASSEMBLY
Attach the handles (Item 25) to the doors using (2) M4-.7 x 8mm phil truss hd screws (Item 30) per door. Fasten (2) 5/8
offset wheel brackets (Item 28) to the front door using (4) 10-24 rolok screws (Item 27), make sure handle is on the right
hand side. Then fasten (2) straight wheel brackets (Item 29) to the back door using (4) 10-24 rolok screws (Item 27), make
sure when brackets are attached that handle is on the left hand side. Assemble (2) roller wheels (Item 26) to each door using
(2) 8-32 x 5/16” pnhd phil screw (Item 31). See (Figure 7).
Figure 7.
STEP 8:
MOUNT DOORS
Hang back door first by tilting door outward at bottom and setting on the back track. Then hang the front door by tilting door
outward at the bottom and setting on the front track. Once both doors are hung then push both doors to one side and slide in
(1) double channel door guide (Item 18). Use (2) 8-32 x ¾ flat hd screw (Item 19) and (2) 8-32 keps nut (Item 20) to fasten
door guide. See (Figure 8).
Figure 8.