Borroughs BASIC PRO SERIES, Руководство по сборке

Страница: 6 / 17

6
IF INSTALLING ROLLER BEARINGS THEN SKIP TO SECTION 2 BEFORE GOING TO STEP 3
STEP 3: FRONT FACE / DOOR TRACK
Place the front face (Item 12) in-between the leg fillers as is shown in (Figure 3). Line up the holes in the leg fillers with the
holes on the ends of the front face and fasten tight with (4) ¼-20 x ¾ hex head TFS (Item 32). Next, fasten the front edge of
the front face to the top using (1) #14x3/4 hex head SDS (Item 33) through the hole in the front face. Place the track cover
(Item 10) on the front face lining up the three holes, then place the track (Item 9) on top of the track cover keeping the three
holes lined up. Using (3) #10-24 x 3/8 Truss Hd Phil (Item 14) and (3) #10-24 keps nut (Item 13) fasten track & track cover
to front face.
Figure 3.