Bornack LH200, Перевод оригинальной инструкции

Страница: 8 / 32

8 | 9
Always check every time be-
fore use!
• The LH200 may no longer be used if
even very minor faults are discovered
when inspected.
• Faulty LH200s may only be tested or
repaired by BORNACK or in a workshop
authorised in writing by BORNACK.
• Regular inspections are essential
because the safety of the user depends
on the efficiency and durability of the
machine.
• The user must have completely read
and understood the instructions
before use.
VISUAL INSPECTION
• Check that the LH200, in particular
rope, rope end connections, connector
and possible rolls of rope) is complete
and in a flawless condition.
• LH200 without mechanical or chem-
ical damage.
• No corrosion of metal parts.
• All rivets and screw connections are
complete and tightened.
• The last inspection by an expert was
carried out within the past 12 months.
• The pins on the roller of the LH200 are
in a flawless condition, are tight and
complete in number.
FUNCTION TEST
• Moving components of the basic unit
runs smoothly.
• The snapper function of the connec-
tor(s) run smoothly. The snapper closes
and locks automatically.
• Arresting function responds to jerking
on the support rope and blocks the
rope.
• The device unlocks again when the
pull rope is pulled.
INFORMATION BEFORE USE