BorMann BPT1250, Руководство пользователя, Страница: 17 / 22

7
SUPPLEMENTARY SAFETY INSTRUCTIONS
⑴
Regularly check that blades and lock bars are locked tight in cutterblock.
⑵
Max. allowable blade projection over cutterblock 1.0mm/0.004 inch +10%.
⑶
Never remove any of the machine’s safety guards other than for servicing and repair work. Keep guards
operational at all times.
⑷
Set and secure safety guards in position before operating machine.
⑸
When operating machine in enclosed spaces connect to a dust collector.
⑹
This machine must be safety earthed. The yellow/green (green) lead is the earth conductor.
⑺
Regularly check anti-kickback fingers for proper operation.
⑻
Always wear eye protection.
⑼
Rebating, tenoning, moulding and recessing may not be undertaken without the use of special guards.
⑽
Never make jointing or planning cut deeper than 2 mm.
USER RESPONSIBILITY
This machine will perform in conformity with the description contained in this manual when installed,
operated, maintained and repaired in accordance with the instructions provided.
This machine must be checked periodically. Defective equipment (including power cable) should not be
used. Parts that are broken, missing, plainly worn, distorted or contaminated, should be replaced
immediately. Should such repair or replacement become necessary, it is recommended that such repairs be
carried out by qualified persons.
This machine or any of its parts should not be altered or changed or changed from standard specifications.
The user of this machine shall have the sole responsibility for any malfunction which results from improper
use or unauthorized modification from standard specification, Faulty maintenance, damage or improper
repair.