BorMann BPT1250, Руководство пользователя, Страница: 13 / 22

3
SAFETY RULES:
WARNING : When using electric tools, basic safety precautions should always be followed to reduce the risk
of fire, electric shock and personal injury, including the following.
Read all these instructions before attempting to operate this product and save these instructions.
(1) Keep work area clear
- Cluttered area and benches invite injuries.
(2) Consider work area environment
- Don’t expose electric tools to rain.
- Do not use electric tools in damp or wet locations.
- Keep work area well lit.
- In particular, no inflammable liquids or gases must be present.
(3) Guard against electric shock
- Avoid body contact with earthed or grounded surface.
(4) Keep children and other persons away
- Don’t let especially children, persons not involved in the work touch the tool or extension cord and keep
them away from the work area.
(5) Store idle tools
- When not in use, tools should be stored in a try locked up place, out of reach of children.
(6) Don’t force the tool
- It will do the job better and safer at the rate for when it was intended.
(7) Use the right tool
- Don’t force small tools to do the job of a heavy duty tool.
- Don’t use tools for purposes not intended: for example, don’t use circular saws to cut tree limbs or logs.
(8) Dress properly
- Don’t wear loose clothing or jewelry. They can be caught in moving parts.
- Rubber gloves and non-skid footwear are recommended when working outdoors.
- Wear protective hair covering to contain long hair.
(9) Use protective equipment
- Use safety glasses.
- Use face or dust mask if cutting operations create dust.
(10) Don’t abuse cables
- Never carry tool by cable or rank it to disconnect it from socket. Keep cable from heat,
oil and sharp edges.
(11) Do not abuse the cord
- Never yank the cord to disconnect it from the socket. Keep the cord away from heat, oil and sharp
edges.
(12) Secure work
- Where possible use clamps or a vice to hold the work. It is safer than
using your hand.
(13) Don’t overreach
- Keep proper footing and balance at all times.
(14) Maintain tools with care
- Keep cutting tools sharp and clean for better and safer performance.
- Follow instruction for lubricating and changing accessories.
- Inspect tool cords periodically and if damaged have them repaired by an authorized service facility.