BorMann 042570, Руководство пользователя, Страница: 6 / 12

6
WWW.BORMANNTOOLS.COM
EN
Forward/reverse selector (right/left rotation selector) (4)
The drill has a forward/reverse selector located above the switch trigger.
- F(Forward) (Forward): Press selector on right side of machine (to the left side): drill turns right (forward, fasten screws)
- R(Reverse) (Reverse): Press selector on left side of machine (to the right side): drill turns left (reverse/ loosen screws)
CAUTION: To prevent damage to the gearbox, always allow the chuck to come to a complete stop before changing the direction of rotation or selecting
another speed (HI-LO). To stop, release the trigger switch.
Speed selector (3)
Your cordless drill has a two-speed gear, designed for drilling or driving at LO or HI speed. A slide switch is located on top of your drill to select either LO (1) or
HI (2) speed. The low speed (LO) is used, in combination with the torque setting, for screwing screws in or out and for drilling with a larger diameter. The high
speed (HI) is used only for drilling (never for screwing, as this may lead to damage of the tool).
LED worklight (6)
Your cordless drill is equipped with an LED light at the front (above the ON/OFF switch) above the battery pack. The white LED light will light when you operate
the machine, providing the work area to be lighted.
TPR soft grip
- Your cordless drill is equipped with TPR soft grip and protective parts. TPR (Thermoplastic rubber) is elastic, chock absorbing and environmental friendly
(recyclable).
Cleaning and care
Your tool has been designed to operate over a long period of time with a minimum of maintenance.
- Continuous satisfactory operation depends upon proper tool care and regular cleaning. Clean your tool using a damp cloth.
- Your charger does not require any maintenance apart from regular cleaning, unplug it before cleaning.
- Use a soft brush or dry cloth.
- KEEP VENTILATION SLOTS CLEAN! Periodically check the air vents for dust or other debris. Clean with compressed air (max. 3 bar)
Do not use any abrasive or solvent-based cleaner. Use clean cloths to remove dirt, carbon dust, etc.
WARNING: Do not allow brake fluids, gasoline, petroleum-based products, penetrating oils, etc. come in contact with plastic parts, they contain chemicals that
can damage, weaken or destroy plastic.
WARNING: Always wear safety goggles or safety glasses with side shields when using compressed air to clean tools. If the operation is dusty, also wear a dust
mask.
BATTERIES:The battery pack for this tool is equipped with a Li-ion rechargeable battery. Do not disassemble battery pack and attempt to replace the batteries
inside.
Service
Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is main-
tained.
Storage
Store your tool in a clean, dry, frost free environment.
- Store your batteries in a cool area. Optimal temperature for storing your Li-ion battery for longer term is 2°C. (capacity loss will only be 6% / year (compared
to 20% at 25°C)). Never store batteries in discharged condition.
- It is better for Li-ion batteries to recharge them frequently. Optimal long time storage charge for your Li-ion battery is at 40% of their capacity.
Recycling
At the end of the working life of this power tool or when it can no longer be repaired, ensure that it is disposed of according to national regulations.— Contact
your local authority for details of collection schemes in your area.
In all circumstances:
• DO NOT dispose of power tools along with domestic waste.
• DO NOT incinerate.
• DO NOT dispose of as unsorted municipal waste.
WARNING!
• DO NOT mutilate or put battery pack in fire; cells may burst or release toxic materials (corrosive electrolyte).
• DO NOT short circuit cells, may cause burns.
• The battery pack must be removed from the appliance before it is scrapped.
• The battery pack is to be disposed of safely.
• DO NOT dispose of batteries or cells in a charged condition.
Expired batteries must be recycled/disposed of in accordance with the appropriate regulation or legislation.
They should be returned to your local warranty agent/stockist.