BorMann 042570, Руководство пользователя, Страница: 4 / 12

4
WWW.BORMANNTOOLS.COM
EN
6. Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or temperature above 130 °C may cause explosion.
7. Follow all charging instructions and do not charge the battery pack or tool outside the temperature range specified in the instruc- tions. Charging improperly
or at temperatures outside the specified range may damage the battery and increase the risk of fire.
Service
1. Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is
maintained.
2. Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized service providers.
3. Follow instructions for lubricating and changing accessories.
4. Keep handles dry, clean and free from oil and grease.
Specific Drill safety warnings
1. Safety instructions for all operations
a. Wear ear protectors when impact drilling. Exposure to noise can cause hearing loss, b. Brace the tool properly before use. This tool produces a high output
torque and without properly bracing the tool during operation, loss of control may occur resulting in personal injury, c. Hold the power tool by insulated grip-
ping surfaces, when performing an operation where the cutting accessory may contact hidden wiring. Cutting accessory contacting a "live" wire may make
exposed metal parts of the power tool "live" and could give the operator an electric shock.
2. Safety instructions when using long drill bits, a. Never operate at higher speed than the maximum speed rating of the drill bit. At higher speeds, the bit is
likely to bend if allowed to rotate freely without contacting the workpiece, resulting in personal injury, b. Always start drilling at low speed and with the bit tip
in contact with the workpiece. At higher speeds, the bit is likely to bend if allowed to rotate freely without contacting the workpiece, resulting in personal injury.
c. Apply pressure only in direct line with the bit and do not apply excessive pressure. Bits can bend causing breakage or loss of control, resulting in personal
injury.
Warning: Harmful and toxic dusts can be produced when you use the tool on hazardous materials. These dusts can endanger the health of operator and by-
standers. Always wear a dust mask when you work, keep bystanders away from the working area and always use the dust collection system. The machine shall
be used in a covered and dry area. The ambient temperature shall be included between 15°C and 30°C. The humidity level shall be less than 60%.
Operation
Battery charging
Use only the battery charger supplied with your tool. Only these battery chargers are matched to the lithium ion battery of your power tool. Insert the charging
cable into the battery pack. Now the red LED will come on to indicate that the battery pack is being charged. When the charging period is completed after
approx 1 hour, the red LED extinguishes and the green LED begins lighting.
Note
:
The battery is supplied partially charged. To ensure full capacity of the battery, completely charge the battery in the battery charger before using your
power tool for the first time. The lithium ion battery can be charged at any time without reducing its service life. Interrupting the charging procedure does
not damage the battery.
To install or remove the battery pack.
To remove the battery, depress the battery release button and gently pull the battery out of the drill.