BorMann 022299, Руководство пользователя

Страница: 21 / 30

21
www.BormannTools.com
This operating instructions manual will help you get to know the machine and utilize its use options better. The operating instructions
manual contains important instructions of working safely, correctly and economically with the machine, and on how you can avoid
risks, save on repair costs, reduce downtime and increase the reliability and shelf - life of the machine.
In addition to the safety clauses of this operating instructions manual, you must also observe the specifications of your country
applicable to the operation of the machine without fail.
Keep the operating instructions manual in a plastic cover near the machine, protected against dirt and humidity. It must be read
and observed carefully by all machine operators before starting work on the machine.
Only persons who are trained to use the machine and who have been instructed about the risks involved should be allowed to
operate the machine. The required minimum age of workers must to be observed. Besides the safety instructions contained in this
operating instructions manual and the specifications of your country, the generally recognized technical rules of engagement for
the operation of the machine must also be observed.
2. Layout
1
Saw blade protection
2
ON/OFF switch
3
Handle on the cutting arm
4
Machine head
5
Motor
6
Roll slide with rubber coating
7
Stop rail with scale
8
Tub
9
Guide rails
10
Transport handle
11
Feet
12
Base frame
13
Longitudinal aligning stop
14
Diamond cutting wheel (Fig 3.2)
15
Spray guard
16
Water shut - off valve
17
Spring
18
Water pump (Fig. 3.1)
General instructions
•
After removing the packing, check the components for possible transport damage. In case of c omplaints, please inform the
delivery agent immediately. Subsequent complaints will not be entertained.
•
Check the delivery to ensure that it is complete.
•
Familiarize yourself with the machine with the help of the operating instructions manual before using it.
•
Use only original parts for accessories as well as consumables and spare parts. Spare parts can be obtained from your retailer.
•
Please quote our article numbers as well as type and production year in all your orders.
Proper use
The machine corresponds to the valid EU Machine Directive
•
Before starting work, all the protection and safety devices must be installed on the machine.
•
The machine is designed for operation by one person. The operator will be responsible for the presence of third persons in
the work area.
•
Observe all safety and danger instructions on the machine.
•
Keep all safety and danger instructions near the machine in complete and in a readable form.
•
The machine with the offered tool and accessories is exclusively designed for the cutting of tile and concrete blocks with a
cutting height of up to 110 mm. The cutting of metal and wood is not permitted.
•
The dimensions of the workpieces to be machined should not exceed or fall below the specified maximum and minimum
dimensions.
•
Please use the machine only if it is in a technically fault - free condition. Use It properly, conscious of the involved safety and
risk factors and giving due consideration to the operating instructions manual! Faults, especially those that can affect safety
must be rectified immediately!
•
The safety, workplace and maintenance specifications of the manufacturer as well as the dimensions specified in the
technical data must be observed.
•
The applicable accident prevention measures and the other generally recognized technical safety rules must be observed.
•
The machine must be used, serviced or repaired only by persons who are familiar with it and who have been briefed about
its risks. Arbitrary alterations to the machine will make the liability of the manufacturer for damages resulting there from null