BorMann 018988, Руководство пользователя, Страница: 4 / 15

4
www.BormannTools.com
Step (3)
Refer to Figure 1 for wiring diagram.
Figure 1
Route the short red and black color coded wires to the motor.
Route the long red and black color coded wires to the battery.
Depends on the model you buy comes with a circuit breaker or
not, if it does:
Attach the circuit breaker to battery end of the red wire. Wrap
the circuit breaker with electrical tape to prevent accidental
short circuits. Apply several layers of electrical tape where
wiring may come into contact with sharp metal parts of the
vehicle to prevent insulation abrasion or cutting.
Attach the circuit breaker wire to the battery positive terminal
and reattach the terminal to the battery. Connect the remaining
black remote control wire to the battery negative terminal.
Please refer to Figure 2.
Step (4)
FREE SPOOL OPERATION
Pull and turn the clutch knob to the " Free” position as
shown in Figure 9.lf there is a load on the wire rope , the
clutch knob may not pull out easily. DO NOT FORCE THE
CLUTCH KNOB. Release tension on the clutch by jogging
out some of the wire rope. Release the clutch and pull
out the wire rope and secure to anchor or load. Check
that there are at least five 5 turns of wire rope left on
the drum. Re-engage the drum by returning the clutch
knob to the "Engaged" position. (See Figure 3) . Activate
the winch in Cable Out momentarily to check drum
rotation direction . If the drum rotates in the wrong
direction, recheck your wiring.
Caution: Clutch must be fully engaged before
winching . Never engage clutch knob while drum is
turning.