Borg & Overstrom b2, Инструкция по установке и эксплуатации

Страница: 14 / 32

Install & Operation Manual Borg & Overström GB 14
Fault Diagnosis: Miscellaneous
Problem/Report Possible Cause Suggested Action
No LED Control Lights No electricity to Machine. Check power supply and reconnect
as necessary (Also check out other
symptoms as described separately).
Control PCB not working (Machine
working normally otherwise).
Check/replace PCB.
Machine Shakes on Start-up Compressor Starting. No action needed. This is quite
normal.
Level Surface.
Uneven Surface. Level up machine using adjustable
feet.
Missing Fixings. Replace missing fixings.
Tripping out Electricity Supply Machine in high humidity
environment.
Discuss possible repositioning with
customer.
Electrical circuitry faults. Test, identify and address
accordingly. See Electrical
Diagrams.
Please contact technical support