EN
14
Device description
www.bora.com
Power level
v
1
2
3
4
5
6
Switch off after
hours:minutes
2:00 8:40 6:45 5:15 4:20 3:30 2:45
Power level
7
8
9
Switch off after
hours:minutes
2:20 1:45 1:30
Tab. 4.5 Overview of the safety shut-down
X
X
Switch the cooking zone back on (see Operating
control) if you want to put the cooking zone back into
operation.
4.4.3 Cooking zone overheating protection
All induction coils plus the cooling elements of the
electronics are equipped with overheating protection.
Before the induction coils and/or cooling elements
overheat, the overheating protection will initiate one of
the following measures:
Q
Q
The power setting
P
automatically switches to power
level
9
after 10 minutes. The cooking zone indicator
P
switches to
9
.
Q
Q
The set power level is reduced.
Q
Q
The cooking zones switch off automatically
(see safety shut-down of the cooking zones).
4.4.4 Childproofing feature
The childproofing feature prevents the cooktop from
being switched on accidentally. The childproofing feature
can only be activated when the cooktop is switched on
and all cooking zones are switched off (see the Operation
chapter).
X
X
Place the cookware (without a mat or similar) directly
onto the glass ceramic.
Noises
The following noises may occur in the cookware when
using induction cooking zones, depending on the material
and the finish of the base:
Q
Q
Humming
may occur when using a high power level. It
decreases or disappears if the power level is decreased.
Q
Q
Crackling or whistling
may occur due to the bases of
cookware made of different materials (e.g. sandwich
base).
Q
Q
Clicking sounds
may occur during electronic switching
procedures especially at low power levels.
Q
Q
Whirring
may occur when the cooling fan is switched
on. In order to increase the service life of the
electronic system, the cooktop is equipped with a
cooling fan. The cooling fan switches on automatically
if the cooktop is used intensively. You will hear a
whirring sound. The cooling fan may continue running
after the device has been switched off.
4.3.6 Pan size recognition
The cooking zone does not work
Q
Q
v
is shown in the display.
Q
Q
If it is switched on without cookware or with unsuitable
cookware.
Q
Q
If the base diameter of the cookware is too small.
Q
Q
If the cookware is removed from a cooking zone that is
switched on.
Q
Q
If the cooking zone does not detect a pot for 10
minutes, it switches off automatically and can only
be switched back on after the control knob has been
turned back to the zero position.
4.4 Safety devices
4.4.1 Residual heat display
INFO
While
H
is displayed in the cooking zone
indicator (residual heat display), do not touch
the cooking zone or place any heat-sensitive
objects on top of it. Risk of burns and fire!
After switching it off, the cooking zone remains hot.
H
is displayed in the cooking zone indicator (residual heat
display). The cooking zone indicator will go out after
sufficient cooling time (temperature < 60 °C).
4.4.2 Safety shut-down of the cooking zone
Each cooking zone is switched off automatically when the
cooking zone in the power level exceeds the maximum
operating duration. The cooking zone indicator then
alternates between displaying
H
(residual heat display)
and
0
.
Содержание PI11
Страница 27: ......
