bora CKASE, Руководство по эксплуатации

Страница: 17 / 32

EN
17
Installation
www.bora.com
Installing the cooktop extractor frame
INFO The cooktop extractor’s substructure module
can only be installed sloping down to the right.
1 2
Abb. 6.14 Installing the cooktop extractor
[1]
Cooktop cut-out
[2] Cooktop extractor frame
X X
Insert the cooktop extractor frame [2] in the middle of
the relevant worktop cut-out.
X X
Precisely position the cooktop extractor.
1
2
Abb. 6.15 Height adjustment plates
[1] Height adjustment plate
[2] Cooktop extractor frame
X X
If applicable, insert the height adjustment plates [1].
> 600
> 50
> 900
Abb. 6.12 Device installation dimensions
6.5.1 Installing the cooktop extractor
Preparing the cooktop extractor frame for
installation in conjunction with the induction
glass ceramic wok
INFO To install the induction glass ceramic wok,
the rail on the left hand side of the cooktop
extractor frame must be removed due to the
6 mm thick glass ceramic.
2 1
Abb. 6.13 Preparing the cooktop extractor frame
[1] Cooktop extractor frame
[2]
Left hand side rail
X X
Use a pair of pliers to remove the rail from the left
hand side of the cooktop extractor frame by carefully
bending it up and down.