IMPORTANT SAFETY INSTRUCTIONS
• Read and keep these safety instructions.
• Heed all warnings contained within these
instructions.
• Please follow all user manual instructions when installing the product.
• Clean SENGLED product only with a dry towel.
• This Product is intended for indoor use only.
• Do NOT use this product outdoors.
• Do NOT get this product wet and
do NOT use near any water source.
• The product should not be exposed to dripping or splashing liquids of any kind.
• Do not install the product near any heat sources, such as heater, radiators,
stove, heat registers or other apparatus that produce heat.
•
Ensure that the product is stable and secured in place during installation. If the
product is dropped or falls out of the light socket, it may cause bodily harm.
• If the product is dropped or falls out of the light socket, it may be damaged.
Please check the product for any visible damage.
• To reduce the risk of electric shock, do NOT remove the back cover or take
apart. There are no serviceable parts inside.
• To prevent product failure, the bulb should only be installed in operating
environments.
• Do
not block any ventilation openings on the product.
• Never push any objects into the openings or slots on the product. Doing so may
create an electric shock or fire hazard.
• Maintain sufficient distance around your product for sufficient ventilation,
do
not put anything within at least 6 inches of lightbulb socket.
• For best protection against lightning, unplug the product from its power source
during a storm.
• Only use accessories specifically recommended by the manufacturer.
• Refer all servicing
to qualified SENGLED service technician.
• Servicing is required when the product:
1) has been damaged in any way;
