BKS-ST-220A_Product Manual
BooCax
21
/
30
boocax.com
Mark the required location on the map, and then set the corresponding path
point/disinfection point ( The small blue icon is the corresponding location point)
Path points
need to be set for the route that the robot passes through, such as turns and
gates, which must be marked (as shown in Figure 2 below: gray points are path
points).
Disinfection points
are set as required for the environmental site (as shown in Figure 3 below:
purple icons are disinfection points).
“Change“、”Connect" function:
Mainly used to connect "nearby points" in series.
“
Change
“is to switch point,
that is, changing the current point of the robot to the selected
nearby point. After this operation, you can click "Connect
" to connect the robot's previous
path point or disinfection point with the current point.
“Change”and “Connection”, these two f
unctions are mainly designed to facilitate route editing.
2)
Free editing-adjust path
➢
If the route by rapid deployment is not applicable, click "
Free Edit
" to adjust the route. The
robot supports adding/deleting/moving points, changing running route, changing disinfection
points, etc.