Page 5
3BE390758NU – 12/11
BONNET GRANDE CUISINE
Registered Office:
Rue des Frères Lumière - Z.I Mitry Compans
F-77292 MITRY MORY Cedex
2.1.2 DETAIL OF THE CONTROL PANEL
Button 5: Switching the oven on
Operation button
Lighting and control panel are on. The display indicates the set
temperature previously programmed.
Note:
The light at the top of the control panel indicates that the oven
is connected electrically but is not on. Pressing the start
button illuminates the time or temperature display, this light
then goes out.
Switch 1: Cooking mode
Forced air convection cooking position (0 to 250°C)
Only the oven heat exchange is on.
Use this position for pastry which must be dried out (choux pastry).
Ventilation is alternated to perfect cooking.
Combi cooking position (30 to 250°C)
Steam + convection.
Use for cooking roasts, pastries which must remain moist, shellfish,
fish, …)
Ventilation is alternated to perfect cooking.
The level of humidity is 10% by default
Steam cooking position (30 to 105°C)
Use for defrosting, cooking vegetables and fish, low temperature
cooking and sous vide … .
Ventilation is not alternated.
Cavity cooling / rinsing position
Provides rapid oven cavity cooling and a rinse.
Start and stop by pressing the button.
Note:
Cooling is achieved by injecting water into the cooking cavity.
Cleaning cycle position
To be used daily once cooking has finished.
The semi automatic cycle provides optimum cleaning in complete
safety. (See chapter: Oven maintenance)