Page 24
3BE390758NU – 12/11
BONNET GRANDE CUISINE
Registered Office:
Rue des Frères Lumière - Z.I Mitry Compans
F-77292 MITRY MORY Cedex
8. MAINTENANCE OF THE OVEN
WARNING:
♦
THE APPLICATION OF CLEANING PRODUCTS WHEN THE APPLIANCE IS STILL HOT,
OVER 60° C, IS STRICTLY PROHIBITED.
The hot surfaces would be damaged instantly (dark colour almost black).
♦
Never use high pressure sprays or hoses: under no circumstances should the appliance be
cleaned with a water jet.
♦
The guarantee will not cover problems caused by failure to comply with the maintenance rules
above.
8.1 MAINTENANCE OF EXTERNAL SURFACES
It is necessary to clean the metal surface carefully so as to eliminate all dust, metal particles and
deposits of any kind which could damage the protective layer mentioned above.
For this purpose, it is sufficient to wash these surfaces with soapy water or any other neutral and non
abrasive cleaning product. RINSE CAREFULLY and wipe the surfaces.
Never scrub stainless steel with metal wool, but if necessary, only with a "Scotch Brite" type pad or a
similar product, by following the direction of polishing of the stainless steel surface.
8.2 MAINTENANCE OF INTERNAL SURFACES
The general principle consists in not letting to leave the following settle in certain places:
- substances likely to become concentrated and so become very corrosive.
- Settling of different minerals contained in water and likely to generate corrosion (walls)
performance and life-duration (fan balancing, exchanger dissipation, ..) problems.
CLEANING, DEGREASING – ONCE A DAY
:
Use of the semi-automatic cleaning cycle.
Every day after the service is completed, position switch 1 to
the "semi-automatic cleaning" position.
If the temperature is not appropriate for cleaning the temperature display will flash and the oven will
heat up or cool down automatically to reach this temperature. Once this temperature is reached, the display
indicates "Pro" and the oven will ring to warn you.
Always wait for the oven to ring before spraying on a cleaning agent.
After the alarm has sounded:
- Open the door (without switching the oven off).
- Remove the right hand runners or the oven module (optional).