Page 6
3BE390758NU – 12/11
BONNET GRANDE CUISINE
Registered Office:
Rue des Frères Lumière - Z.I Mitry Compans
F-77292 MITRY MORY Cedex
Switch 2: Temperature adjustment
Adjustment switch for set temperature
Adjusts temperature.
The corresponding indicator is lit when the oven requires heating.
Without actuating this switch, the indicator shows the set temperature (Temperature required for
cooking).
A first touch of the switch displays the actual temperature of the oven for 5 seconds.
A clockwise rotation increases the set value. An anti-clockwise rotation reduces it.
Value variation is made degree by degree up to 105°C and every 5 degrees above this value.
Actuating a switch on the control panel validates the modified set value.
Without touching any switch on the control panel, the set value is automatically validated after 5
seconds.
Switch 3: Adjustment of the set time, core temperature and speed
Adjustment switch for set values
It allows the adjustment of set values selected by switch 4
The display shows time, core temperature, ventilation speed.
Note:
These set values can be adjusted during cooking or not.
Switch 4 in
core
probe mode
: switch 3 to adjust a core temperature set value(from 0 to 99°).
The multifunction display "SC" (Core probe -) followed by the
temperature.
For example "SC 20", temperature at 20°
Variation is made degree by degree, from 0 to 99°C
When the set core temperature value is reached it will stop cooking and display the message "End".
A programmed set core value cancels a set time value previously programmed.
Without connected core probe.
Actuating this switch modifies core temperature set value.
With connected core probe.
Without actuating this switch, the display shows the
core temperature read by the probe
. (Example:
"SC55" in °C or "P1 30" in °F).
A first touch on this switch displays the core temperature set value (0° to 99°C).
A final touch on this switch corrects the set core temperature value.
