BONFIGLIOLI DGM MPM, Техническое руководство

Страница: 85 / 107

Operating manual for DGM Modular | DOC02389740-0006 | 2021-07 | V1.70 EN 85
No. Error name Description of error Possible causes/remedy
46 Motor parameters Plausibility check for motor parameters failed Parameter set not OK
47 Drive controller parameters Plausibility check for drive controller
parameters failed Parameter set not OK, motor type 33.001
and control method 34.010 not plausible.
48 Type plate data No motor data entered Please enter the motor data according to
the type plate
49 Power class restriction Max. overload of the drive controller
exceeded for more than 60 sec. Check application / reduce load / use
larger drive controller.
53 Motor tipped Only for synchronous motors, field
orientation lost Load too high. Optimise controller
parameters.
Tab. 12: Error detection
*
In exceptional cases, the error may be displayed erroneously when idling (very low motor current) with synchronous motors.
Set parameter 33.016 accordingly when the phases or motor connections are connected correctly.
**
Should the error occur again, depending on frequency, it can only be acknowledged after the following times:
1 -3 acknowledgements
permitted =
4 -5 acknowledgements
permitted =
> 5 acknowledgements
permitted =
1 s waiting time
5 s waiting time
30 s waiting time
The number of acknowledgements is deleted after 120 s without any errors!