Bonex aquaProp, Инструкция по эксплуатации

Страница: 10 / 19

aquaProp–SCOOTER
Instruction for use
Version : SG 2015-11 Page | 10
You should dry the scooter thoroughly before opening after use. Open the scooter after every dive to remove
dirt and any moisture which may have penetrated. Water can lead to corrosion spots on aluminium surfaces
which can be avoided if they are removed immediately. Keep your scooter in a safe, dry place. It should be
stood on the shroud.
The battery should be tested after long breaks. Pay attention to formation of corrosion or oxidation on the power
pack. A white coating may be an indication of defective cells. If the power pack does not work perfectly after
restarting, it must be sent to the manufacturer for inspection.
Store the battery at a save place at approx. 15°C-20°C lagern.
If you intend to store the scooter for a prolonged time (> 4 weeks), store the battery in partially charged
conditions! Recharge battery immediately before intended usage. You should also remove the Tube O-rings
before prolonged storage. Store the O-rings in a bag inside of the scooter.
Attention: Keep in mind to reinstate the O-rings before intended usage!
Risk of damage due to inrush of water!
11. Discharging of NiMh batteries
The decreasing voltage during the discharge affects the performance of AquaProp.
This is illustrated by the following diagrams:
0
10
20
30
40
50
8,0
9,0
10,0
11,0
12,0
13,0
14,0
15,0
16,0
17,0
18,0
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80
m/min
V
min
Aquaprop - discharging step 1
Voltage in V Speed in m/min