9
Step 2 – Install Cylinder on the
base.
Figure 2
■
Put the gas tank in the
tank
.Make
sure the gas tank sits
i
n the
tank supporter
completely.Turn the wing screw on the
outer part of
tank supporter
clockwise to
secure the gas tank tightly.
Please see
Figure 2
Step 3 –Connect the Regulator
to the gas cylinder valve.
■
Turn the cylinder valve clockwise to close the
gas supply on the gas cylinder.
See Figure 3
■
Screw Regulator Coupling clockwise by hand
only.Make sure it is fastened.
See Figure
3
The cylinder connection device is CGA No.
791 Connection.
WARNING
: Do not over bend the tube, and do
not let the tube touch a hot part or sharp edge.
Check for leaks
Warning:
Perform leak test outdoors only
.
Never leak test when smoking.
Do not use a flame to check for leaks.
NOTE:
Whenever gas connections are loosened or
removed, you must perform a complete leak test.
Figure 4
See Figure 4
■
■
■
■
■
Figure 3
9
housing
