BONAIRE WFBL26, Руководство по установке

Страница: 12 / 20

D
ELUXE
W
ALL
F
URNACE
Page 12
Unit Installation
Unit Installation
I
NSTALLING THE
C
ONSOLE
H
EATER
1.
2.
3.
4.
5.
6.
7.
8.
Install the heater assembly:
1.1. Fit flue insulation over flue spigot
before inserting into the header plate.
1.2. Insert the flue spigot of the heater
assembly into the header plate flue
access / twin skin inner flue.
1.3. Place the bottom of the unit onto the
base plate locating it behind the
retaining angle.
Fig. 1
Make the gas connection using a flare and
flare nut connection. See fig.1.
Install the console kit. See Fig.2.
Fig. 2
3.1. Fit to each side of the front panel with
fastenings provided.
Connect the thermostat loom to the circuit
board
Connect the cabinet earth lead
Commission the product as per the
commissioning instructions.
Place front cabinet onto unit:-
7.1. Fit the cabinet over the unit with the top
above the locating teeth on the top of
the unit and slide the cabinet down into
the bottom plastic housing. ( You will
need to give the cabinet a slight bow for
it to fit the moulding)
7.2. Ensure the cabinet is fitting flush
against the wall.
7.3. Secure the cabinet
by fixing the top of
the cabinet with the
2 screws supplied.
See fig.3.
Fit the flue screen
8.1. Fit the flue screen ceiling locator to the
ceiling.
Fig. 3
Fig. 4
8.2. Cut the flue screen components to
length and assemble. See fig.4
8.3. Insert the flue screen into place.