Bona Scorpion, Руководство по эксплуатации для владельца

Страница: 8 / 28

8
SCORPION User Manual_
February 2013 Edition
Placing into service
Instructions for assembly following transportation
3. Insert the plug (pos. 6) in the socket (pos. 7) 4. Lift the drum with the lever (pos. 1 fig. A)
HAZARD Using the machine when not fully assembled may cause injury or damage to people or
objects. Do not use the machine when it is not fully assembled. Keep all fittings tightly
secured. Maintain machine settings in accordance with the specifications.
Instructions on electrical connection
CAUTION This machine only operates with the voltage and frequency shown on the machine data
plate. Before connecting the cable to the power supply ensure the correct voltage and
frequency are available
.
WARNING Do not expose the machine to rain. This machine is intended for dry use only.
Keep the machine in a dry building and do not use it in damp or wet places.
WARNING If the machine is not connected correctly to the electricity network death due to
electrocution may occur. To prevent electric shocks always use a three wire electrical
system connected to earth. For maximum protection against electric shocks use a
circuit protected with a differential cut-out switch.
WARNING Tampering with the earthing plug in any way may result in death from electrocution. Do
not cut, remove or break the earthing plug. If the socket does not match the plug
consult a qualified electrician.
WARNING Do not use the machine if the switch does not open and close.
HAZARD If the machine is used with a damaged plug or power supply cable death may occur
from electrocution. If cables or plugs are worn or damaged in any way, have them
replaced by the manufacturer or the K & T technical support service or similarly
qualified person, in order to prevent risks to safety.
Cables, extensions and plugs
Only use approved cables. The maximum recommended cable length is 7m; for greater lengths use cables with a
larger cross-section.
CAUTION Using the machine with unsuitable cable cross-sections and/or excessively long cables
may cause injury or damage to people or objects.
WARNING The machine must never be moved using its cable and the cable must never be pulled
when disconnecting from the socket.
WARNING Keep the cable away from sources of heat, oil and sharp edges.