21
SCORPION User Manual_
February 2013 Edition
Belt tension (for the user)
Check the belt tension every 500 hours of operation
by removing the belt cover (
pos. 8 fig. B
) after
removing the two screws and loosening the 4 motor
fastening screws (
pos. 1 fig. H
)
Belt tension can be adjusted using the screws (
pos.
2 fig. H
)
After adjustment lock the motor fastening screws
(
pos. 1 fig. H
) and replace the belt cover.
If the belt is excessively worn it must be replaced.
CAUTION
Excessive belt tension may cause the premature failure of the ball bearings.
The belt must have a 10.5 mm stretch with a centre load of 30 ±3 N.
Bearings (only for Technical Support Service)
Check bearings regularly for wear or damage according to the following timescales:
WHEELS:
after the first
2500 hours
FAN SHAFT:
after the first
2500 hours
SANDING DRUM:
after the first
5000 hours
MOTOR SHAFT:
after the first
5000 hours
Spare parts
Always use K & T spare parts.
Failure to use K&T spare parts, or repairs/adjustments carried out by unauthorised personnel, will invalidate the
guarantee and any resulting liability.
The machine must only be repaired by qualified personnel.
This electric equipment is compliant with the
relevant safety legislation.
Repairs must be carried out by qualified personnel using K & T spare parts, otherwise the user may suffer serious
injury.
Содержание Scorpion
Страница 1: ...1 Scorpion by Owner Operation Manual ...
Страница 25: ...25 SCORPION User Manual_February 2013 Edition Diagrams ...
Страница 26: ...26 SCORPION User Manual_February 2013 Edition Diagrams ...
Страница 28: ...28 February 2013 Edition ...
